|
|
|
National Stock Number:
3120-01-218-7170
Federal Supply Class:
3120
National Item Identification Number:
012187170
Description:
BEARING,WASHER,THRUST
Detail:
An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. It is designed for applications involving moving (kinetic) loads. Except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. The thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). Excludes straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. See also WASHER, FLAT and SPACER, SLEEVE.
|
Manufacturer Information:
| 3121841-5 | 81039 | WHIPPANY ACTUATION SYSTEMS, LLC |
|
Techincal Specification:
| DIAMETER | 0.5690 INCHES NOMINAL | | CENTER HOLE SHAPE STYLE | ROUND | | CORNER SHAPE | SQUARE ALL CORNERS | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HARDNESS RATING | 60.0 ROCKWELL C MINIMUM OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7420 MIL SPEC 1ST MATERIAL RESPONSE OVERALL OR AMS 5121 ASSN STD 2ND MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP E52100 OVERALL OR STEEL COMP 1095 OVERALL | | PROPRIETARY CHARACTERISTICS | PACS | | OUTSIDE DIAMETER | 0.9900 INCHES MINIMUM | | OVERALL THICKNESS | 0.0610 INCHES MINIMUM AND 0.0630 INCHES MAXIMUM | | STYLE DESIGNATOR | ROUND | | SURFACE FINISH | 16.0 MICROINCHES LEFT SIDE | | SURFACE FINISH | 16.0 MICROINCHES RIGHT SIDE | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-16173,GRADE 3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | LUBRICANT DRY FILM OVERALL | | TEST DATA DOCUMENT | 81349-MIL-I-6868 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
|
|