|
|
|
National Stock Number:
3120-01-211-7531
Federal Supply Class:
3120
National Item Identification Number:
012117531
Description:
BUSHING,SLEEVE
Detail:
A tubular shaped unthreaded item with or without a flange at one end designed to be inserted into a hole to reduce the inside diameter of the hole and to protect the surrounding body structure from damage resulting from stress, strain, and/or vibration. The overall length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body. Includes items which are divided into two or more segments which includes 180 degrees (3.141 radians) or less of the bearing periphery. For items made of rubber, see BUSHING, NONMETALLIC. See also BEARING, SLEEVE; BUSHING, TAPERED; SPACER, SLEEVE; INSULATOR, BUSHING; and BUSHING, ELECTRICAL CONDUCTOR. Excludes BUSHING, DRILL, JIG.
|
Manufacturer Information:
| 62-XA-1 PIECE 5 | 53553 | AMETEK INC SCHUTTE AND KOERTING DIV |
|
Techincal Specification:
| BODY INSIDE DIAMETER | 1.3750 INCHES MINIMUM AND 1.3770 INCHES MAXIMUM | | BODY OUTSIDE DIAMETER | 2.7510 INCHES MINIMUM AND 2.7520 INCHES MAXIMUM | | CORNER SHAPE | CHAMFERED INSIDE LEFT CORNER | | CORNER SHAPE | CHAMFERED LEFT FLANGE OUTSIDE RIGHT CORNER | | CORNER SHAPE | CHAMFERED OUTSIDE RIGHT CORNER | | CORNER SHAPE | SQUARE INSIDE RIGHT CORNER | | CORNER SHAPE | SQUARE OUTSIDE LEFT CORNER | | CORNER SHAPE | UNDERCUT LEFT FLANGE BODY CORNER | | FLANGE OUTSIDE DIAMETER | 3.3680 INCHES MINIMUM AND 3.3730 INCHES MAXIMUM | | FLANGE WIDTH | 0.5313 INCHES NOMINAL | | OVERALL LENGTH | 1.2500 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | 63-S-129,FSCM 53553 MFR REF SINGLE MATERIAL RESPONSE INNER LAYER | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A182 ASSN STD SINGLE MATERIAL RESPONSE OUTER LAYER | | MATERIAL | CHROMIUM AND COBALT INNER LAYER | | MATERIAL | STEEL COMP 410 OUTER LAYER | | SPECIAL FEATURES | CIRCULAR GROOVE LEFT END SURFACE OF BODY AND FLANGE 0.1563 IN. WIDE,0.375 IN. DEEP,0.124 IN. FROM OUTSIDE LEFT CORNER | | STYLE DESIGNATOR | SOLID, EXTERNAL FLANGE ONE END | | SURFACE FINISH | 63.0 MICROINCHES OVERALL | | TEST DATA DOCUMENT | 53553-61-S-273 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
|
|