BORE CENTER TO SHANK END DISTANCE | 3.8650 INCHES MINIMUM AND 3.8850 INCHES MAXIMUM |
BORE DIAMETER | 0.7495 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM |
HARDNESS RATING | 55.0 ROCKWELL C MINIMUM INNER MEMBER |
HARDNESS RATING | 28.0 ROCKWELL C MINIMUM AND 37.0 ROCKWELL C MAXIMUM RACE INSERT |
HARDNESS RATING | 35.0 ROCKWELL C MINIMUM AND 42.0 ROCKWELL C MAXIMUM ROD END BODY |
INNER MEMBER WIDTH | 0.9980 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM |
LUBRICATION FEATURE | SELF-LUBRICATING LINER RACE LINER |
OUTER MEMBER WIDTH | 0.7450 INCHES MINIMUM AND 0.7550 INCHES MAXIMUM |
OUTER MEMBER OUTSIDE DIAMETER | 1.9900 INCHES MINIMUM AND 2.0100 INCHES MAXIMUM |
OVERALL LENGTH | 4.8750 INCHES NOMINAL |
MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE RACE INSERT |
MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE ROD END BODY |
MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE INNER MEMBER |
MATERIAL | PLASTIC POLYTETRAFLUOROETHYLENE RACE LINER |
MATERIAL | STEEL COMP 630 RACE INSERT |
MATERIAL | STEEL COMP 630 ROD END BODY |
MATERIAL | STEEL COMP 440C INNER MEMBER |
SHANK STYLE | EXTERNALLY THREADED |
SHANK THREAD LENGTH | 2.6560 INCHES MINIMUM AND 2.7490 INCHES MAXIMUM |
SPECIAL FEATURES | MS14198 KEYWAY IN SHANK,0.156 IN. WIDE,0.098 IN. DEEP |
STATIC RADIAL LOAD RATING | 36510 POUNDS |
STYLE DESIGNATOR | BALL TYPE |
TEST DATA DOCUMENT | 81349-MIL-I-6866 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
THREAD CLASS | 3A |
THREAD DIAMETER | 0.875 INCHES NOMINAL |
THREAD DIRECTION | RIGHT-HAND |
THREAD SERIES DESIGNATOR | UNJF |
THREAD QUANTITY PER INCH | 14 |