3120-01-204-4822, BUSHING,SLEEVE

National Stock Number:
3120-01-204-4822

Federal Supply Class:
3120

National Item Identification Number:
012044822

Description:
BUSHING,SLEEVE

Detail:
A tubular shaped unthreaded item with or without a flange at one end designed to be inserted into a hole to reduce the inside diameter of the hole and to protect the surrounding body structure from damage resulting from stress, strain, and/or vibration. The overall length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body. Includes items which are divided into two or more segments which includes 180 degrees (3.141 radians) or less of the bearing periphery. For items made of rubber, see BUSHING, NONMETALLIC. See also BEARING, SLEEVE; BUSHING, TAPERED; SPACER, SLEEVE; INSULATOR, BUSHING; and BUSHING, ELECTRICAL CONDUCTOR. Excludes BUSHING, DRILL, JIG.

Manufacturer Information:

3862152-12

99193

HONEYWELL INTERNATIONAL INC.

Techincal Specification:

ANTIROTATION/LUBRICATION TYPE AND QUANTITY	1 HOLE
BODY INSIDE DIAMETER	3.0700 INCHES MINIMUM AND 3.0900 INCHES MAXIMUM
BODY OUTSIDE DIAMETER	3.2538 INCHES MINIMUM AND 3.2543 INCHES MAXIMUM
CORNER SHAPE	CHAMFERED INSIDE RIGHT CORNER
CORNER SHAPE	SQUARE INSIDE LEFT CORNER
CORNER SHAPE	SQUARE OUTSIDE LEFT CORNER
CORNER SHAPE	SQUARE OUTSIDE RIGHT CORNER
HARDNESS RATING	28.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL
HOLE DIAMETER	0.1188 INCHES MINIMUM AND 0.1193 INCHES MAXIMUM FIRST
LEFT INTERNAL FLANGE HOLE DIAMETER	2.8400 INCHES MINIMUM AND 2.8600 INCHES MAXIMUM
LEFT INTERNAL FLANGE WIDTH	0.1200 INCHES MINIMUM AND 0.1300 INCHES MAXIMUM
OVERALL LENGTH	0.8450 INCHES MINIMUM AND 0.8550 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR AMS 6415 ASSN STD 2ND MATERIAL RESPONSE OR MIL-T-6736 MIL SPEC 3RD MATERIAL RESPONSE OR AMS 6360 ASSN STD 3RD MATERIAL RESPONSE OR EMS56627,FSCM 99137 MFR REF 4TH MATERIAL RESPONSE OVERALL
MATERIAL	STEEL COMP E4340 OR STEEL COMP 4340 OR STEEL COMP 4130 OR STEEL OVERALL
SPECIAL FEATURES	LUBRICATION HOLE LOCATED 0.400 IN. FROM RIGHT OUTSIDE CORNER TO CENTER
STYLE DESIGNATOR	SOLID, PLAIN, NO OUTSIDE FLANGES, INTERNAL FLANGE ONE END
SURFACE FINISH	32.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF BODY
TEST DATA DOCUMENT	99193-EMS52308 CL 3 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).

Click here to Register for Free 30-day Trial