3120-01-166-2395 BEARING,SLEEVE Index 3120-01-166-2397 BEARING,SLEEVE

National Stock Number:
3120-01-166-2396

Federal Supply Class:
3120

National Item Identification Number:
011662396

Description:
BEARING,SLEEVE

Detail:
A tubular shaped item with or without flange(s) designed to reduce friction and carry a kinetic load on the surface(s) parallel to the axis of the bore. It must have a visible or detectable means of lubrication or be self-lubricated. The over all length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body, except for straight tubular (without flange or shoulder) items having a bearing surface(s) parallel to the axis of the bore only. Includes items which are divided into two or more segments which include 180 degrees (3.141 radians) or less of the bearing periphery. See also BUSHING, SLEEVE; SPACER, SLEEVE; and WASHER (as modified). Excludes PIN, HOLLOW.


Manufacturer Information:
7653109-0798747OGDEN AIR LOGISTICS CENTER
8340951-1098747OGDEN AIR LOGISTICS CENTER


Techincal Specification:
ANTIROTATION/LUBRICATION TYPE AND QUANTITY2 HOLE
BODY INSIDE DIAMETER9.5600 INCHES NOMINAL
BODY OUTSIDE DIAMETER10.0600 INCHES NOMINAL
CORNER SHAPECHAMFERED INSIDE LEFT CORNER
CORNER SHAPECHAMFERED OUTSIDE LEFT CORNER
CORNER SHAPEROUND LEFT FLANGE BODY CORNER
CORNER SHAPEROUND OUTSIDE RIGHT CORNER
CORNER SHAPESQUARE INSIDE RIGHT CORNER
CORNER SHAPESQUARE LEFT FLANGE OUTSIDE RIGHT CORNER
FLANGE OUTSIDE DIAMETER10.1180 INCHES MINIMUM AND 10.1200 INCHES MAXIMUM
FLANGE WIDTH3.9600 INCHES NOMINAL
HOLE DIAMETER0.37475 INCHES MINIMUM AND 0.62750 INCHES MAXIMUM FIRST
LEFT INTERNAL FLANGE HOLE DIAMETER9.0620 INCHES MINIMUM AND 9.0650 INCHES MAXIMUM
LEFT INTERNAL FLANGE WIDTH3.9000 INCHES NOMINAL
LUBRICANT ACCOMMODATION STYLEGROOVED OPEN ONE END
OVERALL LENGTH5.5900 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-200/2 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-367 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIALALUMINUM ALLOY 2014 OVERALL
STYLE DESIGNATORSOLID, EXTERNAL FLANGE ONE END, INTERNAL FLANGE ONE END
SURFACE FINISH125.0 MICROINCHES INSIDE DIAMETER SURFACE OF BODY
SURFACE FINISH125.0 MICROINCHES LEFT END SURFACE OF BODY AND FLANGE
SURFACE FINISH125.0 MICROINCHES RIGHT END SURFACE OF BODY
SURFACE FINISH125.0 MICROINCHES RIGHT END SURFACE OF LEFT FLANGE
SURFACE FINISH125.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF BODY
SURFACE FINISH32.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF FLANGE
SURFACE GROOVE LOCATION AND QUANTITY6 INTERNAL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625,TYPE2,CLASS1 MIL SPEC 2ND TREATMENT RESPONSE LEFT END SURFACE OF BODY AND FLANGE
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625,TYPE2,CLASS1 MIL SPEC 2ND TREATMENT RESPONSE OUTSIDE DIAMETER SURFACE OF BODY
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625,TYPE2,CLASS1 MIL SPEC 2ND TREATMENT RESPONSE RIGHT END SURFACE OF BODY
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625,TYPE2,CLASS1 MIL SPEC 2ND TREATMENT RESPONSE RIGHT END SURFACE OF LEFT FLANGE
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625,TYPE2,CLASS1 MIL SPEC 2ND TREATMENT RESPONSE INSIDE DIAMETER SURFACE OF BODY
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-W-6712,TYPE 2 MIL SPEC 1ST TREATMENT RESPONSE OUTSIDE DIAMETER SURFACE OF FLANGE
SURFACE TREATMENTANODIZE INSIDE DIAMETER SURFACE OF BODY
SURFACE TREATMENTANODIZE LEFT END SURFACE OF BODY AND FLANGE
SURFACE TREATMENTANODIZE OUTSIDE DIAMETER SURFACE OF BODY
SURFACE TREATMENTANODIZE RIGHT END SURFACE OF BODY
SURFACE TREATMENTANODIZE RIGHT END SURFACE OF LEFT FLANGE
SURFACE TREATMENTCOPPER ALLOY OUTSIDE DIAMETER SURFACE OF FLANGE


Click here to Register for Free 30-day Trial

© 2024 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us