|
|
|
National Stock Number:
3120-01-165-5629
Federal Supply Class:
3120
National Item Identification Number:
011655629
Description:
BEARING,WASHER,THRUST
Detail:
An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. It is designed for applications involving moving (kinetic) loads. Except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. The thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). Excludes straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. See also WASHER, FLAT and SPACER, SLEEVE.
|
Manufacturer Information:
| 6556075 | 11862 | GENERAL MOTORS CORP CHEVROLET MOTOR DIV SPECIAL PRODUCTS DEPT | | 6556075 | 7X677 | GENERAL MOTORS LLC |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CORNER SHAPE | SQUARE ALL CORNERS | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | DIAMETER | 0.7570 INCHES MINIMUM AND 0.7600 INCHES MAXIMUM | | OUTSIDE DIAMETER | 1.4688 INCHES NOMINAL | | OVERALL THICKNESS | 0.09875 INCHES MINIMUM AND 0.09925 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | 552-B,FSCM 11862 MFR REF SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL OVERALL | | STYLE DESIGNATOR | ROUND | | SURFACE FINISH | 20.0 MICROINCHES LEFT SIDE | | SURFACE FINISH | 20.0 MICROINCHES RIGHT SIDE |
|
|