|
|
|
National Stock Number:
3120-01-159-2832
Federal Supply Class:
3120
National Item Identification Number:
011592832
Description:
BEARING,WASHER,THRUST
Detail:
An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. It is designed for applications involving moving (kinetic) loads. Except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. The thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). Excludes straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. See also WASHER, FLAT and SPACER, SLEEVE.
|
Manufacturer Information:
| 07G890 | 11083 | CATERPILLAR INC | | 7G890 | 11083 | CATERPILLAR INC |
|
Techincal Specification:
| OUTSIDE DIAMETER | 38.0 MILLIMETERS NOMINAL | | OVERALL THICKNESS | 1.42 MILLIMETERS MINIMUM AND 1.62 MILLIMETERS MAXIMUM | | STYLE DESIGNATOR | ROUND | | DIAMETER | 20.44 MILLIMETERS MINIMUM AND 20.70 MILLIMETERS MAXIMUM | | CENTER HOLE SHAPE STYLE | ROUND | | CORNER SHAPE | SQUARE ALL CORNERS | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | LUBRICATION MATERIAL | LUBRICANT, MANUFACTURERS STANDARD | | MATERIAL DOCUMENT AND CLASSIFICATION | SP-21-D,FSCM 18873 MFR REF SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | PLASTIC POLYAMIDE OVERALL | | PROPRIETARY CHARACTERISTICS | PACS |
|
|