|
|
|
National Stock Number:
3120-01-069-1360
Federal Supply Class:
3120
National Item Identification Number:
010691360
Description:
BEARING,WASHER,THRUST
Detail:
An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. It is designed for applications involving moving (kinetic) loads. Except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. The thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). Excludes straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. See also WASHER, FLAT and SPACER, SLEEVE.
|
Manufacturer Information:
| 06430 | 98991 | WORCESTER CONTROLS CORP P O BOX 2609 COOKEVILLE TN 385022609 | | B01707 | 98991 | WORCESTER CONTROLS CORP P O BOX 2609 COOKEVILLE TN 385022609 |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CORNER SHAPE | SQUARE ALL CORNERS | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | DIAMETER | 0.1060 INCHES MINIMUM AND 0.1090 INCHES MAXIMUM | | LUBRICATION MATERIAL | LUBRICATING OIL | | OUTSIDE DIAMETER | 0.6780 INCHES MINIMUM AND 0.6830 INCHES MAXIMUM | | OVERALL THICKNESS | 0.0280 INCHES MINIMUM AND 0.0320 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | MULTIFILL 427,FSCM 26124 MFR REF SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | PLASTIC OVERALL | | STYLE DESIGNATOR | ROUND |
|
|