| BORE CENTER TO SHANK END DISTANCE | 1.3650 INCHES MINIMUM AND 1.3850 INCHES MAXIMUM |
| BORE DIAMETER | 0.2495 INCHES MINIMUM AND 0.2515 INCHES MAXIMUM |
| CRITICALITY CODE JUSTIFICATION | SPCL |
| HARDNESS RATING | 60.0 ROCKWELL C MINIMUM INNER MEMBER |
| INNER MEMBER WIDTH | 0.4320 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM |
| INSPECTION HOLE CENTER TO END DISTANCE | 0.3070 INCHES MINIMUM AND 0.3170 INCHES MAXIMUM |
| OUTER MEMBER OUTSIDE DIAMETER | 0.8020 INCHES MINIMUM AND 0.8220 INCHES MAXIMUM |
| OUTER MEMBER WIDTH | 0.2990 INCHES MINIMUM AND 0.3090 INCHES MAXIMUM |
| OVERALL LENGTH | 1.7710 INCHES MINIMUM AND 1.7910 INCHES MAXIMUM |
| SHANK WIDTH ACROSS WRENCH FLATS | 0.3650 INCHES MINIMUM AND 0.3850 INCHES MAXIMUM |
| SHANK STYLE | INTERNALLY THREADED W/BEAD AND WRENCH FLATS AND INSPECTION HOLE |
| SHANK THREAD LENGTH | 0.7500 INCHES MINIMUM |
| SPECIAL FEATURES | AS DIFFERENTIATED BY MATERIAL WHICH MUST CONFORM TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL PROVISIONS |
| SPECIAL TEST FEATURES | SPECIAL QUALITY CONTROL TESTING |
| STATIC RADIAL LOAD RATING | 2948 POUNDS |
| STYLE DESIGNATOR | BALL TYPE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE ROD END BODY |
| SURFACE TREATMENT | CADMIUM ROD END BODY |
| TEST DATA DOCUMENT | 81349-MIL-P-23199 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| THREAD CLASS | 3B |
| THREAD DIAMETER | 0.250 INCHES NOMINAL |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD QUANTITY PER INCH | 28 |
| THREAD SERIES DESIGNATOR | UNF |