5320-01-041-6458 RIVET,BLIND Index 3120-01-041-6460 BUSHING,SLEEVE

National Stock Number:
3120-01-041-6459

Federal Supply Class:
3120

National Item Identification Number:
010416459

Description:
BEARING,SLEEVE

Detail:
A tubular shaped item with or without flange(s) designed to reduce friction and carry a kinetic load on the surface(s) parallel to the axis of the bore. It must have a visible or detectable means of lubrication or be self-lubricated. The over all length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body, except for straight tubular (without flange or shoulder) items having a bearing surface(s) parallel to the axis of the bore only. Includes items which are divided into two or more segments which include 180 degrees (3.141 radians) or less of the bearing periphery. See also BUSHING, SLEEVE; SPACER, SLEEVE; and WASHER (as modified). Excludes PIN, HOLLOW.


Manufacturer Information:
120-1208-12577896REXNORD INDUSTRIES, LLC
91384-08-12509455RBC TRANSPORT DYNAMICS CORP
ATGF8A12515860NEW HAMPSHIRE BALL BEARINGS INC
FBJW16T-F-1253NPS1RBC AIRCRAFT PRODUCTS, INC.
FBJW16TF12521335TIMKEN CO
GB528BE8D12526512NORTHROP GRUMMAN SYSTEMS CORPORATION
GDFRDD8-12573134ROLLER BEARING CO OF AMERICA INC


Techincal Specification:
BODY INSIDE DIAMETER0.5000 INCHES MINIMUM AND 0.5010 INCHES MAXIMUM
BODY OUTSIDE DIAMETER0.6260 INCHES MINIMUM AND 0.6265 INCHES MAXIMUM
CORNER SHAPESQUARE INSIDE LEFT CORNER
CORNER SHAPESQUARE INSIDE RIGHT CORNER
CORNER SHAPESQUARE LEFT FLANGE OUTSIDE RIGHT CORNER
CORNER SHAPESQUARE OUTSIDE LEFT CORNER
CORNER SHAPESQUARE OUTSIDE RIGHT CORNER
CORNER SHAPEUNDERCUT LEFT FLANGE BODY CORNER
FLANGE OUTSIDE DIAMETER0.7400 INCHES MINIMUM AND 0.7600 INCHES MAXIMUM
FLANGE WIDTH0.0620 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM
OVERALL LENGTH1.3070 INCHES MINIMUM AND 1.3220 INCHES MAXIMUM
MATERIALALUMINUM ALLOY 2024 OUTER LAYER
MATERIALPLASTIC POLYTETRAFLUOROETHYLENE AND GLASS FIBER OR PLASTIC POLYTETRAFLUOROETHYLENE AND PLASTIC POLYETHYLENE TEREPHTHALATE INNER LAYER
SPECIAL FEATURESPLASTIC BONDED TO LEFT END SURFACE OF BODY AND FLANGE
STYLE DESIGNATORSOLID, EXTERNAL FLANGE ONE END
SURFACE FINISH125.0 MICROINCHES INSIDE DIAMETER SURFACE OF BODY
SURFACE FINISH125.0 MICROINCHES LEFT END SURFACE OF BODY AND FLANGE
SURFACE FINISH125.0 MICROINCHES RIGHT END SURFACE OF BODY
SURFACE FINISH125.0 MICROINCHES RIGHT END SURFACE OF LEFT FLANGE
SURFACE FINISH125.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF FLANGE
SURFACE FINISH63.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF BODY
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE OUTER LAYER
SURFACE TREATMENTANODIZE OUTER LAYER


Click here to Register for Free 30-day Trial