|
|
|
National Stock Number:
3120-01-040-4863
Federal Supply Class:
3120
National Item Identification Number:
010404863
Description:
BEARING,PLAIN,SELF-ALIGNING
Detail:
A detachable assembly in or on which a journal, gudgeon, pivot, or the like moves. It is used to carry a load and to reduce sliding friction. It does not employ rolling elements. The item consists of a bored precision ground ball (or spherical plain bearing) around which an outer ring is fitted. The assembly may be either separable or nonseparable. Excludes BEARING, PLAIN, ROD END and BEARING, PLAIN, SPHERICAL.
|
Manufacturer Information:
| 10107696 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | AS14103 | 81343 | SOCIETY OF AUTOMOTIVE ENGINEERS INC | | AS81820 | 81343 | SOCIETY OF AUTOMOTIVE ENGINEERS INC | | AS81820/1 | 81343 | SOCIETY OF AUTOMOTIVE ENGINEERS INC | | MS14103-10 | 0U583 | SAE INTERNATIONAL | | MS14103-10 | 81343 | SOCIETY OF AUTOMOTIVE ENGINEERS INC | | MS14103-10 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS21230-10 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | SAE AS14103 | 81343 | SOCIETY OF AUTOMOTIVE ENGINEERS INC | | SAE-AS81820 | 0U583 | SAE INTERNATIONAL |
|
Techincal Specification:
| BORE DIAMETER | 0.6245 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM | | HARDNESS RATING | 55.0 ROCKWELL C MINIMUM AND 62.0 ROCKWELL C MAXIMUM INNER MEMBER | | HARDNESS RATING | 28.0 ROCKWELL C MINIMUM AND 37.0 ROCKWELL C MAXIMUM OUTER RACE MEMBER | | INNER MEMBER WIDTH | 0.7480 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM | | OUTER MEMBER WIDTH | 0.5620 INCHES MINIMUM AND 0.5720 INCHES MAXIMUM | | OUTER MEMBER OUTSIDE DIAMETER | 1.1870 INCHES MINIMUM AND 1.1875 INCHES MAXIMUM | | MATERIAL | PLASTIC POLYTETRAFLUOROETHYLENE RACE LINER | | MATERIAL | STEEL COMP 630 OUTER RACE MEMBER | | MATERIAL | STEEL COMP 440C INNER MEMBER | | STATIC RADIAL LOAD RATING | 29000 POUNDS | | STYLE DESIGNATOR | WITH INSERT AND/OR LINER WITH STAKING GROOVE |
|
|