3110-01-025-6483 BEARING,ROLLER,NEEDLE Index 3120-01-025-6486 BUSHING,SLEEVE

National Stock Number:
3120-01-025-6485

Federal Supply Class:
3120

National Item Identification Number:
010256485

Description:
BEARING,SLEEVE

Detail:
A tubular shaped item with or without flange(s) designed to reduce friction and carry a kinetic load on the surface(s) parallel to the axis of the bore. It must have a visible or detectable means of lubrication or be self-lubricated. The over all length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body, except for straight tubular (without flange or shoulder) items having a bearing surface(s) parallel to the axis of the bore only. Includes items which are divided into two or more segments which include 180 degrees (3.141 radians) or less of the bearing periphery. See also BUSHING, SLEEVE; SPACER, SLEEVE; and WASHER (as modified). Excludes PIN, HOLLOW.


Manufacturer Information:
07-282-08C01209455RBC TRANSPORT DYNAMICS CORP
102-3008-01277896REXNORD INDUSTRIES, LLC
123-2008C01277896REXNORD INDUSTRIES, LLC
3120PL06849209009HINSPEKTORAT WSPARCIA SIL ZBROJNYCH
53G970715-2576301THE BOEING COMPANY
ADLF08C01215860NEW HAMPSHIRE BALL BEARINGS INC
AHJF08C01250294NEW HAMPSHIRE BALL BEARINGS INC
AS81934/20U583SAE INTERNATIONAL
AS81934/281343SOCIETY OF AUTOMOTIVE ENGINEERS INC
FBJW16TH-08C01221335TIMKEN CO
FBJW16TH1221335TIMKEN CO
FBJW16TH12M21335TIMKEN CO
FBJW16TH12M3NPS1RBC AIRCRAFT PRODUCTS, INC.
FBRR-08C01273134ROLLER BEARING CO OF AMERICA INC
KDJ08C012-34297613SARGENT AEROSPACE & DEFENSE, LLC
KRJ8SB-08C012M50632KAMATICS CORPORATION
M81934/2-08C0120U583SAE INTERNATIONAL
M81934/2-08C01281343SOCIETY OF AUTOMOTIVE ENGINEERS INC
M81934/2-08C01281349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MIL-B-81934/281349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MS21241-08C01296906MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M


Techincal Specification:
BODY INSIDE DIAMETER0.5005 INCHES MINIMUM AND 0.5015 INCHES MAXIMUM
BODY OUTSIDE DIAMETER0.6260 INCHES MINIMUM AND 0.6265 INCHES MAXIMUM
CORNER SHAPESQUARE INSIDE LEFT CORNER
CORNER SHAPESQUARE INSIDE RIGHT CORNER
CORNER SHAPESQUARE LEFT FLANGE OUTSIDE RIGHT CORNER
CORNER SHAPESQUARE OUTSIDE LEFT CORNER
CORNER SHAPESQUARE OUTSIDE RIGHT CORNER
CORNER SHAPEUNDERCUT LEFT FLANGE BODY CORNER
FLANGE OUTSIDE DIAMETER0.9800 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM
FLANGE WIDTH0.0575 INCHES MINIMUM AND 0.0625 INCHES MAXIMUM
OVERALL LENGTH0.4225 INCHES MINIMUM AND 0.4375 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5643 ASSN STD SINGLE MATERIAL RESPONSE OUTER LAYER
MATERIALPLASTIC POLYTETRAFLUOROETHYLENE INNER LAYER
MATERIALSTEEL COMP 630 OUTER LAYER
SPECIAL FEATURESPLASTIC,POLYTETRAFLUOROETHYLENE LINER BONDED TO LEFT END SURFACE OF FLANGE
STYLE DESIGNATORSOLID, EXTERNAL FLANGE ONE END
SURFACE FINISH125.0 MICROINCHES INSIDE DIAMETER SURFACE OF BODY
SURFACE FINISH125.0 MICROINCHES LEFT END SURFACE OF BODY AND FLANGE
SURFACE FINISH125.0 MICROINCHES RIGHT END SURFACE OF BODY
SURFACE FINISH125.0 MICROINCHES RIGHT END SURFACE OF LEFT FLANGE
SURFACE FINISH125.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF FLANGE
SURFACE FINISH63.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF BODY


Click here to Register for Free 30-day Trial