3120-01-024-4911, BUSHING,SLEEVE

National Stock Number:
3120-01-024-4911

Federal Supply Class:
3120

National Item Identification Number:
010244911

Description:
BUSHING,SLEEVE

Detail:
A tubular shaped unthreaded item with or without a flange at one end designed to be inserted into a hole to reduce the inside diameter of the hole and to protect the surrounding body structure from damage resulting from stress, strain, and/or vibration. The overall length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body. Includes items which are divided into two or more segments which includes 180 degrees (3.141 radians) or less of the bearing periphery. For items made of rubber, see BUSHING, NONMETALLIC. See also BEARING, SLEEVE; BUSHING, TAPERED; SPACER, SLEEVE; INSULATOR, BUSHING; and BUSHING, ELECTRICAL CONDUCTOR. Excludes BUSHING, DRILL, JIG.

Manufacturer Information:

160D712502-6	26512	NORTHROP GRUMMAN SYSTEMS CORPORATION
160D712502-6	79RG9	NORTHROP GRUMMAN SYSTEMS CORPORATION
162D712502-2011	76301	THE BOEING COMPANY
162D712502-2011	98747	OGDEN AIR LOGISTICS CENTER

Techincal Specification:

BODY INSIDE DIAMETER	0.9840 INCHES MINIMUM AND 0.9910 INCHES MAXIMUM
BODY OUTSIDE DIAMETER	1.1888 INCHES MINIMUM AND 1.1898 INCHES MAXIMUM
CORNER SHAPE	CHAMFERED INSIDE RIGHT CORNER
CORNER SHAPE	CHAMFERED INSIDE LEFT CORNER
CORNER SHAPE	SQUARE LEFT FLANGE OUTSIDE RIGHT CORNER
CORNER SHAPE	SQUARE OUTSIDE LEFT CORNER
CORNER SHAPE	SQUARE OUTSIDE RIGHT CORNER
CORNER SHAPE	UNDERCUT LEFT FLANGE BODY CORNER
FLANGE OUTSIDE DIAMETER	2.1100 INCHES MINIMUM AND 2.1300 INCHES MAXIMUM
FLANGE WIDTH	0.1150 INCHES MINIMUM AND 0.1350 INCHES MAXIMUM
MATERIAL	STEEL COMP XM-12 OVERALL
PROPRIETARY CHARACTERISTICS	PACS
OVERALL LENGTH	0.9000 INCHES MINIMUM AND 0.9250 INCHES MAXIMUM
STYLE DESIGNATOR	SOLID, EXTERNAL FLANGE ONE END
SURFACE FINISH	63.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF BODY
SURFACE FINISH	125.0 MICROINCHES INSIDE DIAMETER SURFACE OF BODY
SURFACE FINISH	125.0 MICROINCHES LEFT END SURFACE OF BODY AND FLANGE
SURFACE FINISH	125.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF FLANGE
SURFACE FINISH	125.0 MICROINCHES RIGHT END SURFACE OF BODY
SURFACE FINISH	125.0 MICROINCHES RIGHT END SURFACE OF LEFT FLANGE
SURFACE TREATMENT	CADMIUM OVERALL
TEST DATA DOCUMENT	81349-MIL-I-6866 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).

Click here to Register for Free 30-day Trial