|
|
|
National Stock Number:
3120-01-019-1559
Federal Supply Class:
3120
National Item Identification Number:
010191559
Description:
BEARING,WASHER,THRUST
Detail:
An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. It is designed for applications involving moving (kinetic) loads. Except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. The thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). Excludes straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. See also WASHER, FLAT and SPACER, SLEEVE.
|
Manufacturer Information:
| 3441708 | 82577 | RAYTHEON COMPANY |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CORNER SHAPE | SQUARE FIRST INSIDE CORNER | | CORNER SHAPE | SQUARE FIRST OUTSIDE CORNER | | CORNER SHAPE | SQUARE FOURTH OUTSIDE CORNER | | CORNER SHAPE | SQUARE SECOND INSIDE CORNER | | CORNER SHAPE | SQUARE SECOND OUTSIDE CORNER | | CORNER SHAPE | SQUARE THIRD OUTSIDE CORNER | | CROSS-SECTIONAL SHAPE STYLE | SHOULDERED | | DIAMETER | 0.5625 INCHES MINIMUM AND 0.5629 INCHES MAXIMUM | | FLANGE THICKNESS | 0.0600 INCHES MINIMUM AND 0.0640 INCHES MAXIMUM | | LUBRICATION MATERIAL | LUBRICATING OIL, MIL-L-6085 | | OUTSIDE DIAMETER | 0.8750 INCHES NOMINAL | | OVERALL THICKNESS | 0.1880 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-B-5687,TY 1,COMP A MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | COPPER ALLOY OVERALL | | SHANK OUTSIDE DIAMETER | 0.6882 INCHES MINIMUM AND 0.6886 INCHES MAXIMUM | | STYLE DESIGNATOR | ROUND | | SURFACE FINISH | 125.0 MICROINCHES RIGHT SIDE OF FLANGE |
|
|