3120-01-015-3416, BUSHING,SLEEVE

National Stock Number:
3120-01-015-3416

Federal Supply Class:
3120

National Item Identification Number:
010153416

Description:
BUSHING,SLEEVE

Detail:
A tubular shaped unthreaded item with or without a flange at one end designed to be inserted into a hole to reduce the inside diameter of the hole and to protect the surrounding body structure from damage resulting from stress, strain, and/or vibration. The overall length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body. Includes items which are divided into two or more segments which includes 180 degrees (3.141 radians) or less of the bearing periphery. For items made of rubber, see BUSHING, NONMETALLIC. See also BEARING, SLEEVE; BUSHING, TAPERED; SPACER, SLEEVE; INSULATOR, BUSHING; and BUSHING, ELECTRICAL CONDUCTOR. Excludes BUSHING, DRILL, JIG.

Manufacturer Information:

19093-5	02121	GOODRICH AEROSPACE CANADA LTD.
19093-5	26512	NORTHROP GRUMMAN SYSTEMS CORPORATION
SFJ093-5	16746	RBC SPECLINE INC

Techincal Specification:

BODY INSIDE DIAMETER	0.5400 INCHES MINIMUM AND 0.5450 INCHES MAXIMUM
BODY OUTSIDE DIAMETER	0.6888 INCHES MINIMUM AND 0.6893 INCHES MAXIMUM
CORNER SHAPE	CHAMFERED INSIDE LEFT CORNER
CORNER SHAPE	CHAMFERED INSIDE RIGHT CORNER
CORNER SHAPE	CHAMFERED OUTSIDE RIGHT CORNER
CORNER SHAPE	SQUARE LEFT FLANGE BODY CORNER
CORNER SHAPE	SQUARE LEFT FLANGE OUTSIDE RIGHT CORNER
CORNER SHAPE	SQUARE OUTSIDE LEFT CORNER
FLANGE OUTSIDE DIAMETER	0.9850 INCHES MINIMUM AND 1.0150 INCHES MAXIMUM
FLANGE WIDTH	0.0750 INCHES MINIMUM AND 0.0800 INCHES MAXIMUM
OVERALL LENGTH	0.9600 INCHES MINIMUM AND 0.9950 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	STEEL COMP 630 OVERALL
STYLE DESIGNATOR	SOLID, EXTERNAL FLANGE ONE END
SURFACE FINISH	125.0 MICROINCHES INSIDE DIAMETER SURFACE OF BODY
SURFACE FINISH	125.0 MICROINCHES LEFT END SURFACE OF BODY AND FLANGE
SURFACE FINISH	125.0 MICROINCHES RIGHT END SURFACE OF BODY
SURFACE FINISH	125.0 MICROINCHES RIGHT END SURFACE OF LEFT FLANGE
SURFACE FINISH	125.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF FLANGE
SURFACE FINISH	32.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF BODY
SURFACE TREATMENT	CADMIUM OR TITANIUM OVERALL
TEST DATA DOCUMENT	81349-MIL-I-6868 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).

Click here to Register for Free 30-day Trial