|
|
|
National Stock Number:
3120-01-013-7238
Federal Supply Class:
3120
National Item Identification Number:
010137238
Description:
BEARING,WASHER,THRUST
Detail:
An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. It is designed for applications involving moving (kinetic) loads. Except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. The thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). Excludes straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. See also WASHER, FLAT and SPACER, SLEEVE.
|
Manufacturer Information:
| 35287 | 24235 | WILLIAMS INTERNATIONAL CO., L.L.C. |
|
Techincal Specification:
| MATERIAL | CARBON GRAPHITE INNER MEMBER | | STEEL CORROSION RESISTING OUTER RACE MEMBER | | MATERIAL DOCUMENT AND CLASSIFICATION | 03-570 24235 MFR REF SINGLE MATERIAL RESPONSE OUTER RACE MEMBER | | HARDNESS RATING | 75.0 SHORE SCLEROSCOPE NOMINAL OVERALL | | STYLE DESIGNATOR | ROUND | | OUTSIDE DIAMETER | 1.4590 INCHES MINIMUM AND | | 1.4610 INCHES MAXIMUM | | CORNER SHAPE | SQUARE ALL CORNERS | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | OVERALL THICKNESS | 0.1240 INCHES MINIMUM AND | | 0.1260 INCHES MAXIMUM | | CENTER HOLE SHAPE STYLE | ROUND | | DIAMETER | 1.1130 INCHES MINIMUM AND | | 1.1140 INCHES MAXIMUM | | SURFACE FINISH | 8.0 MICROINCHES INNER MEMBER | | 8.0 MICROINCHES LEFT SIDE | | 8.0 MICROINCHES RIGHT SIDE | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 24235 | | DESIGN CONTROL REFERENCE | 35287 |
|
|