| BORE CENTER TO SHANK END DISTANCE | 1.8120 INCHES NOMINAL |
| BORE DIAMETER | 0.2495 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM |
| HARDNESS RATING | 38.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM INNER MEMBER |
| HARDNESS RATING | 38.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM RACE INSERT |
| HARDNESS RATING | 38.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM ROD END BODY |
| INNER MEMBER WIDTH | 0.4950 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| OUTER MEMBER OUTSIDE DIAMETER | 0.9995 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM |
| OUTER MEMBER WIDTH | 0.2450 INCHES MINIMUM AND 0.2550 INCHES MAXIMUM |
| OVERALL LENGTH | 2.2330 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7097 MIL SPEC SINGLE MATERIAL RESPONSE INNER MEMBER |
| MATERIAL | RUBBER RACE LINER |
| MATERIAL | STEEL COMP 1018 OR STEEL COMP 1020 OR STEEL COMP 1025 INNER MEMBER |
| MATERIAL | STEEL COMP 1018 OR STEEL COMP 1020 OR STEEL COMP 1025 RACE INSERT |
| MATERIAL | STEEL COMP XM-12 ROD END BODY |
| SHANK STYLE | EXTERNALLY THREADED |
| SHANK THREAD LENGTH | 1.2020 INCHES NOMINAL |
| STYLE DESIGNATOR | BALL TYPE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 1,CLASS 1 FED SPEC SINGLE TREATMENT RESPONSE INNER MEMBER |
| SURFACE TREATMENT | CADMIUM INNER MEMBER |
| SURFACE TREATMENT | CADMIUM RACE INSERT |
| SURFACE TREATMENT | PASSIVATE ROD END BODY |
| TEST DATA DOCUMENT | 81349-MIL-I-6866 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| THREAD CLASS | 3A |
| THREAD DIAMETER | 0.437 INCHES NOMINAL |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD QUANTITY PER INCH | 20 |
| THREAD SERIES DESIGNATOR | UNJF |