|
|
|
National Stock Number:
3120-01-003-2934
Federal Supply Class:
3120
National Item Identification Number:
010032934
Description:
BEARING,WASHER,THRUST
Detail:
An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. It is designed for applications involving moving (kinetic) loads. Except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. The thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). Excludes straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. See also WASHER, FLAT and SPACER, SLEEVE.
|
Manufacturer Information:
| 2841622 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CORNER SHAPE | SQUARE ALL CORNERS | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | DIAMETER | 0.3850 INCHES MINIMUM AND 0.3950 INCHES MAXIMUM | | LUBRICATION MATERIAL | LUBRICATING OIL, MIL-L-6085 | | OUTSIDE DIAMETER | 0.7500 INCHES NOMINAL | | OVERALL THICKNESS | 0.0280 INCHES MINIMUM AND 0.0340 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-B-5687,TYPE 1,GRADE 1 MIL SPEC 1ST MATERIAL RESPONSE AND MIL-B-5687,TYPE 1,GRADE 2 MIL SPEC 2ND MATERIAL RESPONSE OVERALL | | MATERIAL | COPPER ALLOY OR COPPER ALLOY AND LEAD OVERALL | | STYLE DESIGNATOR | ROUND | | SURFACE CONDITION | GROUND |
|
|