| MATERIAL | STEEL COMP E52100 INNER MEMBER |
| COPPER ALLOY 482 RACE INSERT |
| STEEL COMP 1018 ROD END BODY |
| SURFACE TREATMENT | CADMIUM ROD END BODY |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE ROD END BODY |
| STYLE DESIGNATOR | BALL TYPE |
| OVERALL LENGTH | 1.6770 INCHES MINIMUM AND |
| 1.6970 INCHES MAXIMUM |
| BORE DIAMETER | 0.2495 INCHES MINIMUM AND |
| 0.2515 INCHES MAXIMUM |
| OUTER MEMBER OUTSIDE DIAMETER | 0.7400 INCHES MINIMUM AND |
| 0.7600 INCHES MAXIMUM |
| BORE CENTER TO SHANK END DISTANCE | 1.3020 INCHES MINIMUM AND |
| 1.3220 INCHES MAXIMUM |
| OUTER MEMBER WIDTH | 0.2760 INCHES MINIMUM AND |
| 0.2860 INCHES MAXIMUM |
| INNER MEMBER WIDTH | 0.3700 INCHES MINIMUM AND |
| 0.3750 INCHES MAXIMUM |
| LUBRICATION MATERIAL | LUBRICANT, MANUFACTURERS STANDARD |
| LUBRICATION FEATURE | GROOVE RACE INSERT |
| STATIC RADIAL LOAD RATING | 2704 POUNDS |
| SHANK STYLE | INTERNALLY THREADED W/BEAD AND WRENCH FLATS AND INSPECTION HOLE |
| SHANK THREAD LENGTH | 0.7500 INCHES MINIMUM |
| INSPECTION HOLE CENTER TO END DISTANCE | 0.3070 INCHES MINIMUM AND |
| 0.3170 INCHES MAXIMUM |
| SHANK WIDTH ACROSS WRENCH FLATS | 0.3650 INCHES MINIMUM AND |
| 0.3850 INCHES MAXIMUM |
| THREAD SERIES DESIGNATOR | UNF |
| THREAD DIAMETER | 0.250 INCHES NOMINAL |
| THREAD QUANTITY PER INCH | 28 |
| THREAD CLASS | 3B |
| THREAD DIRECTION | RIGHT-HAND |
| FEATURES PROVIDED | SCREW PLUG CLOSURE FITTING |
| SPECIAL FEATURES | ITEM MUST COMPLY WITH REQUIREMENTS OF DEFENSE SUPPLY CENTER RICHMOND PRODUCTION STANDARD RO0090;REFERENCE NUMBER DIFFERENTIATING MATERIAL WILL BE IN ACCORDANCE WITH ACTIVITY HX QUALITY CONTROL. MANUFACTURING AND TESTION SPECIFICATIONS AVAILABLE AT THE DLA ICP |
| TEST DATA DOCUMENT | 81349-MIL-P-23199 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| CRITICALITY CODE JUSTIFICATION | FEAT |