5910-00-834-2191 CAPACITOR,FIXED,MICA DIELECTRIC Index 5910-00-834-2195 CAPACITOR,FIXED,ELECTROLYTIC

National Stock Number:
3120-00-834-2193

Federal Supply Class:
3120

National Item Identification Number:
008342193

Description:
BUSHING,SLEEVE

Detail:
A tubular shaped unthreaded item with or without a flange at one end designed to be inserted into a hole to reduce the inside diameter of the hole and to protect the surrounding body structure from damage resulting from stress, strain, and/or vibration. The overall length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body. Includes items which are divided into two or more segments which includes 180 degrees (3.141 radians) or less of the bearing periphery. For items made of rubber, see BUSHING, NONMETALLIC. See also BEARING, SLEEVE; BUSHING, TAPERED; SPACER, SLEEVE; INSULATOR, BUSHING; and BUSHING, ELECTRICAL CONDUCTOR. Excludes BUSHING, DRILL, JIG.


Manufacturer Information:
L44000-11-417564AIRGLAS, INC.


Techincal Specification:
ANTIROTATION/LUBRICATION TYPE AND QUANTITY2 HOLE
BODY INSIDE DIAMETER2.0020 INCHES MINIMUM AND 2.0030 INCHES MAXIMUM
BODY OUTSIDE DIAMETER2.4700 INCHES MINIMUM AND 2.5300 INCHES MAXIMUM
CORNER SHAPECHAMFERED INSIDE LEFT CORNER
CORNER SHAPECHAMFERED INSIDE RIGHT CORNER
CORNER SHAPESQUARE LEFT FLANGE BODY CORNER
CORNER SHAPESQUARE LEFT FLANGE OUTSIDE RIGHT CORNER
CORNER SHAPESQUARE OUTSIDE LEFT CORNER
CORNER SHAPESQUARE OUTSIDE RIGHT CORNER
FLANGE OUTSIDE DIAMETER3.0900 INCHES MINIMUM AND 3.1500 INCHES MAXIMUM
FLANGE WIDTH0.1150 INCHES MINIMUM AND 0.1350 INCHES MAXIMUM
HOLE DIAMETER0.2000 INCHES NOMINAL FIRST
LUBRICANT ACCOMMODATION STYLEGROOVED CIRCULAR
OVERALL LENGTH4.3650 INCHES MINIMUM AND 4.3850 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-763 FED SPEC 1ST MATERIAL RESPONSE OR 17-4PH,FSCM 03876 MFR REF 1ST MATERIAL RESPONSE OR 66 FED STD 2ND MATERIAL RESPONSE INNER LAYER
MATERIAL DOCUMENT AND CLASSIFICATIONTYPE 4B2,FSCM 99384 MFR REF SINGLE MATERIAL RESPONSE OUTER LAYER
MATERIALGLASS FIBER OUTER LAYER
MATERIALSTEEL OR STEEL COMP 4340 INNER LAYER
SPECIAL FEATURESTHD 2-1/8-16 UN 3B OPPOSITE END OF FLANGE 0.6250 IN.LG,2 HOLES EQUALLYSPACED 0.2000 IN. W,0.3200 IN. LG LOCATED 0.1550 IN. FROM RIGHT END SURFACE
STYLE DESIGNATORSOLID, EXTERNAL FLANGE ONE END
SURFACE FINISH125.0 MICROINCHES LEFT END SURFACE OF BODY AND FLANGE
SURFACE FINISH125.0 MICROINCHES RIGHT END SURFACE OF BODY
SURFACE FINISH125.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF FLANGE
SURFACE FINISH125.0 MICROINCHES RIGHT END SURFACE OF LEFT FLANGE
SURFACE FINISH63.0 MICROINCHES INSIDE DIAMETER SURFACE OF BODY
SURFACE GROOVE LOCATION AND QUANTITY5 INTERNAL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-S-5002 MIL SPEC 1ST TREATMENT RESPONSE OR QQ-P-416,CL 2 FED SPEC 2ND TREATMENT RESPONSE INNER LAYER
SURFACE TREATMENTPASSIVATE OR CADMIUM INNER LAYER
TEST DATA DOCUMENT81349-MIL-I-6866 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). AND 81349-MIL-I-6868 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us