6685-00-809-5310 GAGE,PRESSURE,DIAL INDICATING Index 5970-00-809-5313 INSULATION SLEEVING,ELECTRICAL

National Stock Number:
3120-00-809-5311

Federal Supply Class:
3120

National Item Identification Number:
008095311

Description:
BEARING,WASHER,THRUST

Detail:
An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. It is designed for applications involving moving (kinetic) loads. Except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. The thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). Excludes straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. See also WASHER, FLAT and SPACER, SLEEVE.


Manufacturer Information:
11179-9-3734161KOEHRING CO
11179-9-378E499KOEHRING CRANES AND EXCAVATORS INC SUB OF NORTHWEST ENGINEERING CO
11179-9-3797403CECOM LR CENTER
1118881795ALLIANZ SWEEPER COMPANY
MILB568781349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
T2400-112204DAIMLER CHRYSLER
T2400-170417CHRYSLER CORP AMPLEX DIV
TT2400-112204DAIMLER CHRYSLER
TT2400-170417CHRYSLER CORP AMPLEX DIV
TT2400-175292EAGLE-PICHER INDUSTRIES INC KINGWELL DIV


Techincal Specification:
CENTER HOLE SHAPE STYLEROUND
CORNER SHAPESQUARE ALL CORNERS
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
DIAMETER1.7450 INCHES MINIMUM AND 1.7650 INCHES MAXIMUM
LUBRICATION MATERIALLUBRICATING OIL, MIL-L-15016
OUTSIDE DIAMETER2.4250 INCHES MINIMUM AND 2.4550 INCHES MAXIMUM
OVERALL THICKNESS0.1225 INCHES MINIMUM AND 0.1275 INCHES MAXIMUM
MATERIALCOPPER ALLOY OVERALL
NONDEFINITIVE SPEC/STD DATA1 TYPE AND A COMPOSITION
STYLE DESIGNATORROUND


Click here to Register for Free 30-day Trial