5945-00-808-4548 SOLENOID,ELECTRICAL Index 5330-00-808-4552 RETAINER,PACKING

National Stock Number:
3120-00-808-4551

Federal Supply Class:
3120

National Item Identification Number:
008084551

Description:
BEARING,WASHER,THRUST

Detail:
An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. It is designed for applications involving moving (kinetic) loads. Except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. The thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). Excludes straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. See also WASHER, FLAT and SPACER, SLEEVE.


Manufacturer Information:
1650B19082402TRIUMPH GEAR SYSTEMS INC


Techincal Specification:
CENTER HOLE SHAPE STYLEROUND
CORNER SHAPESQUARE ALL CORNERS
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
DIAMETER0.9850 INCHES MINIMUM AND 0.9900 INCHES MAXIMUM
OUTSIDE DIAMETER1.1870 INCHES NOMINAL
OVERALL THICKNESS0.1010 INCHES MINIMUM AND 0.1030 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-T-5066 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIALSTEEL COMP 1025 OVERALL
STYLE DESIGNATORROUND


Click here to Register for Free 30-day Trial