|
|
|
National Stock Number:
3120-00-781-4737
Federal Supply Class:
3120
National Item Identification Number:
007814737
Description:
BEARING,PLAIN,ROD END
Detail:
A detachable assembly in or on which a journal, gudgeon, pivot, or the like moves. It is used to carry a load and to reduce sliding friction. It does not employ rolling elements. The outer member of the assembly is modified to provide a shank. The inner member may be either a plain spherical bearing or a sleeve bearing. Excludes BEARING, PLAIN, SPHERICAL and BEARING, PLAIN, SELF-ALIGNING.
|
Manufacturer Information:
| 50E06-100W | 16746 | RBC SPECLINE INC | | 77284 | 09455 | RBC TRANSPORT DYNAMICS CORP | | ARHT6E4 | 15860 | NEW HAMPSHIRE BALL BEARINGS INC | | ARHT6E4 | 50294 | NEW HAMPSHIRE BALL BEARINGS INC | | DREMS6-080 | 81376 | RBC SOUTHWEST PRODUCTS, INC. | | DREMS6-085 | 81376 | RBC SOUTHWEST PRODUCTS, INC. | | KBNE6-200W | 97613 | SARGENT AEROSPACE & DEFENSE, LLC | | MSSJKR-6 | 73134 | ROLLER BEARING CO OF AMERICA INC | | MSSJKV-6 | 73134 | ROLLER BEARING CO OF AMERICA INC | | STSKG200T006 | 09455 | RBC TRANSPORT DYNAMICS CORP | | STSKG200T006 | 16746 | RBC SPECLINE INC | | STSKG200T006 | 73134 | ROLLER BEARING CO OF AMERICA INC | | STSKG200T006 | 81376 | RBC SOUTHWEST PRODUCTS, INC. | | STSKG200T006 | 97613 | SARGENT AEROSPACE & DEFENSE, LLC | | STSKG200T006 | 98897 | LOCKHEED MARTIN CORP | | TFM106N | 77896 | REXNORD INDUSTRIES, LLC |
|
Techincal Specification:
| BORE CENTER TO SHANK END DISTANCE | 2.3020 INCHES MINIMUM AND 2.3220 INCHES MAXIMUM | | BORE DIAMETER | 0.3745 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM | | HARDNESS RATING | 55.0 ROCKWELL C MINIMUM AND 62.0 ROCKWELL C MAXIMUM INNER MEMBER | | HARDNESS RATING | 23.0 ROCKWELL C MINIMUM AND 35.0 ROCKWELL C MAXIMUM RACE INSERT | | HARDNESS RATING | 36.0 ROCKWELL C MINIMUM AND 42.0 ROCKWELL C MAXIMUM ROD END BODY | | INNER MEMBER WIDTH | 0.4950 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM | | OUTER MEMBER WIDTH | 0.3700 INCHES MINIMUM AND 0.3800 INCHES MAXIMUM | | OUTER MEMBER OUTSIDE DIAMETER | 1.1150 INCHES MINIMUM AND 1.1350 INCHES MAXIMUM | | OVERALL LENGTH | 2.8595 INCHES MINIMUM AND 2.8895 INCHES MAXIMUM | | MATERIAL | PLASTIC POLYTETRAFLUOROETHYLENE RACE LINER | | MATERIAL | STEEL COMP 630 RACE INSERT | | MATERIAL | STEEL COMP 630 ROD END BODY | | MATERIAL | STEEL COMP 440C INNER MEMBER | | SHANK STYLE | EXTERNALLY THREADED | | SHANK THREAD LENGTH | 1.3440 INCHES MINIMUM AND 1.4380 INCHES MAXIMUM | | SPECIAL FEATURES | KEYWAY IN SHANK | | STATIC RADIAL LOAD RATING | 10140 POUNDS | | STYLE DESIGNATOR | BALL TYPE | | SURFACE TREATMENT | CHROMIUM INNER MEMBER | | TEST DATA DOCUMENT | 81349-MIL-I-6866 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | THREAD CLASS | 3A | | THREAD DIAMETER | 0.438 INCHES NOMINAL | | THREAD DIRECTION | RIGHT-HAND | | THREAD SERIES DESIGNATOR | UNF | | THREAD QUANTITY PER INCH | 20 |
|
|