|
|
|
National Stock Number:
3120-00-769-0877
Federal Supply Class:
3120
National Item Identification Number:
007690877
Description:
BEARING,PLAIN,ROD END
Detail:
A detachable assembly in or on which a journal, gudgeon, pivot, or the like moves. It is used to carry a load and to reduce sliding friction. It does not employ rolling elements. The outer member of the assembly is modified to provide a shank. The inner member may be either a plain spherical bearing or a sleeve bearing. Excludes BEARING, PLAIN, SPHERICAL and BEARING, PLAIN, SELF-ALIGNING.
|
Manufacturer Information:
| A51M10501-1 | 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | A51M10501-1 | 61174 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | A51M10501-1 | 79RG9 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
|
Techincal Specification:
| BORE CENTER TO SHANK END DISTANCE | 4.0000 INCHES NOMINAL | | BORE DIAMETER | 0.2495 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM | | HARDNESS RATING | 55.0 ROCKWELL C MINIMUM AND 62.0 ROCKWELL C MAXIMUM INNER MEMBER | | HARDNESS RATING | 55.0 ROCKWELL C MINIMUM AND 62.0 ROCKWELL C MAXIMUM RACE INSERT | | HARDNESS RATING | 55.0 ROCKWELL C MINIMUM AND 62.0 ROCKWELL C MAXIMUM ROD END BODY | | INNER MEMBER WIDTH | 0.4350 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM | | OUTER MEMBER WIDTH | 0.3170 INCHES MINIMUM AND 0.3270 INCHES MAXIMUM | | OUTER MEMBER OUTSIDE DIAMETER | 0.8120 INCHES NOMINAL | | OVERALL LENGTH | 4.4060 INCHES NOMINAL | | MATERIAL | PLASTIC POLYTETRAFLUOROETHYLENE RACE LINER | | MATERIAL | STEEL COMP 440C OVERALL | | MATERIAL | STEEL COMP E4340 ROD END BODY | | MATERIAL | STEEL COMP 410 RACE INSERT | | SHANK STYLE | EXTERNALLY THREADED | | SHANK THREAD LENGTH | 1.1000 INCHES NOMINAL | | STYLE DESIGNATOR | BALL TYPE | | SURFACE TREATMENT | CADMIUM ROD END BODY | | TEST DATA DOCUMENT | 81349-MIL-I-6868 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | THREAD CLASS | 3A | | THREAD DIAMETER | 0.375 INCHES NOMINAL | | THREAD DIRECTION | RIGHT-HAND | | THREAD SERIES DESIGNATOR | UNJF | | THREAD QUANTITY PER INCH | 24 |
|
|