|
|
|
National Stock Number:
3120-00-690-8600
Federal Supply Class:
3120
National Item Identification Number:
006908600
Description:
BEARING,WASHER,THRUST
Detail:
An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. It is designed for applications involving moving (kinetic) loads. Except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. The thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). Excludes straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. See also WASHER, FLAT and SPACER, SLEEVE.
|
Manufacturer Information:
| 261918R2 | 0SAT8 | KOMATSU AMERICA CORP. | | 261918R2 | 29510 | KOMATSU AMERICAN INTL CO | | 261918R2 | 31007 | NAVISTAR INTL CORP | | 261918R2 | 92679 | NAVISTAR INTL CORP MELROSE PARK ENGINE PLANT LOCATION /MELROSE PARK/ | | 624762C1 | 0SAT8 | KOMATSU AMERICA CORP. | | 624762C1 | 29510 | KOMATSU AMERICAN INTL CO | | 624762C1 | 31007 | NAVISTAR INTL CORP | | 624762C1 | 92679 | NAVISTAR INTL CORP MELROSE PARK ENGINE PLANT LOCATION /MELROSE PARK/ |
|
Techincal Specification:
| MATERIAL | COPPER ALLOY 546-CANCELED OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-B-13501 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | HARDNESS RATING | 60.0 ROCKWELL B MINIMUM OVERALL | | STYLE DESIGNATOR | ROUND | | OUTSIDE DIAMETER | 3.5940 INCHES NOMINAL | | CORNER SHAPE | SQUARE ALL CORNERS | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | OVERALL THICKNESS | 0.1220 INCHES MINIMUM AND | | 0.1250 INCHES MAXIMUM | | CENTER HOLE SHAPE STYLE | ROUND | | DIAMETER | 2.6560 INCHES NOMINAL | | SURFACE CONDITION | GROUND |
|
|