|
|
|
National Stock Number:
3120-00-678-8593
Federal Supply Class:
3120
National Item Identification Number:
006788593
Description:
BEARING,WASHER,THRUST
Detail:
An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. It is designed for applications involving moving (kinetic) loads. Except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. The thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). Excludes straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. See also WASHER, FLAT and SPACER, SLEEVE.
|
Manufacturer Information:
| 76283 | 11599 | TRIUMPH ENGINE CONTROL SYSTEMS LLC | | 76283 | C0297 | GOODRICH CONTROL SYSTEMS GMBH |
|
Techincal Specification:
| MATERIAL | PLASTIC OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | 76283,11599 MFR REF SINGLE MATERIAL RESPONSE OVERALL | | STYLE DESIGNATOR | ROUND | | OUTSIDE DIAMETER | 0.3900 INCHES MINIMUM AND | | 0.4100 INCHES MAXIMUM | | CORNER SHAPE | SQUARE ALL CORNERS | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | OVERALL THICKNESS | 0.0330 INCHES MINIMUM AND | | 0.0390 INCHES MAXIMUM | | CENTER HOLE SHAPE STYLE | ROUND | | DIAMETER | 0.1900 INCHES MINIMUM AND | | 0.2100 INCHES MAXIMUM | | SURFACE FINISH | 125.0 MICROINCHES INSIDE DIAMETER SURFACE OF BODY | | 125.0 MICROINCHES LARGEST OUTSIDE DIAMETER | | 32.0 MICROINCHES LEFT SIDE | | 32.0 MICROINCHES RIGHT SIDE | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 11599 | | DESIGN CONTROL REFERENCE | 76283 |
|
|