3120-00-672-7501 BUSHING,SLEEVE Index 4320-00-672-7504 RING,WEARING

National Stock Number:
3120-00-672-7503

Federal Supply Class:
3120

National Item Identification Number:
006727503

Description:
BEARING,SLEEVE

Detail:
A tubular shaped item with or without flange(s) designed to reduce friction and carry a kinetic load on the surface(s) parallel to the axis of the bore. It must have a visible or detectable means of lubrication or be self-lubricated. The over all length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body, except for straight tubular (without flange or shoulder) items having a bearing surface(s) parallel to the axis of the bore only. Includes items which are divided into two or more segments which include 180 degrees (3.141 radians) or less of the bearing periphery. See also BUSHING, SLEEVE; SPACER, SLEEVE; and WASHER (as modified). Excludes PIN, HOLLOW.


Manufacturer Information:
17084P0UBG9CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION
17084P93232CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION
4078954402RPS-FL, INC.
91874493232CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION
CS672750307310CALABRESE & SONS, INC.
HM-4078953660HOFFERT MARINE INC
P-17084P13581PRECISION PRODUCTS CO
RY1187440UBG9CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION
RY11874493232CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION


Techincal Specification:
BODY INSIDE DIAMETER2.7500 INCHES MINIMUM AND 2.7510 INCHES MAXIMUM
BODY OUTSIDE DIAMETER3.4980 INCHES MINIMUM AND 3.5000 INCHES MAXIMUM
CORNER SHAPESQUARE INSIDE LEFT CORNER
CORNER SHAPESQUARE INSIDE RIGHT CORNER
CORNER SHAPESQUARE LEFT FLANGE BODY CORNER
CORNER SHAPESQUARE LEFT FLANGE OUTSIDE RIGHT CORNER
CORNER SHAPESQUARE OUTSIDE LEFT CORNER
CORNER SHAPESQUARE RIGHT FLANGE BODY CORNER
CORNER SHAPESQUARE RIGHT FLANGE OUTSIDE LEFT CORNER
CORNER SHAPESQUARE OUTSIDE RIGHT CORNER
END TO FLANGE DISTANCE3.1250 INCHES NOMINAL
FLANGE WIDTH0.9688 INCHES NOMINAL
LUBRICANT ACCOMMODATION STYLEGROOVED OPEN BOTH ENDS
OVERALL LENGTH7.3750 INCHES NOMINAL
MATERIALCOPPER ALLOY 937 OVERALL
SPECIAL FEATURES2.0312 IN. RADIUS OF FLANGE ON UPPER HALF OF BOTH SEGMENTS,1.8594 IN. RADIUS OF FLANGE ON LOWER HALF OF BOTH SEGMENTS,UPPER HALF OF CENTER FLANGE OUTSIDE LEFT CORNER UNDERCUT 0.1250 IN. W BY 0.1718 IN.,STYLE 69 INTERNAL GROOVE IN LOWER HALF OF HALF A
STYLE DESIGNATORSEGMENTED, EXTERNAL FLANGE
SURFACE FINISH125.0 MICROINCHES LEFT END SURFACE OF BODY
SURFACE FINISH125.0 MICROINCHES LEFT END SURFACE OF FLANGE
SURFACE FINISH125.0 MICROINCHES RIGHT END SURFACE OF BODY
SURFACE FINISH125.0 MICROINCHES RIGHT END SURFACE OF FLANGE
SURFACE FINISH125.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF BODY
SURFACE FINISH125.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF FLANGE
SURFACE FINISH63.0 MICROINCHES INSIDE DIAMETER SURFACE OF BODY
SURFACE GROOVE LOCATION AND QUANTITY1 INTERNAL


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us