| BORE CENTER TO SHANK END DISTANCE | 3.3020 INCHES MINIMUM AND 3.3220 INCHES MAXIMUM |
| BORE DIAMETER | 0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| HARDNESS RATING | 36.0 ROCKWELL C MINIMUM AND 39.0 ROCKWELL C MAXIMUM ROD END BODY |
| INNER MEMBER WIDTH | 0.9350 INCHES MINIMUM AND 0.9370 INCHES MAXIMUM |
| OUTER MEMBER WIDTH | 0.6250 INCHES MINIMUM AND 0.6350 INCHES MAXIMUM |
| OUTER MEMBER OUTSIDE DIAMETER | 1.7900 INCHES MINIMUM AND 1.8100 INCHES MAXIMUM |
| OVERALL LENGTH | 4.1970 INCHES MINIMUM AND 4.2270 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5610 ASSN STD SINGLE MATERIAL RESPONSE RACE INSERT |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE ROD END BODY |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE INNER LAYER |
| MATERIAL | PLASTIC TETRAFLUOROETHYLENE RACE LINER |
| MATERIAL | STEEL COMP 630 ROD END BODY |
| MATERIAL | STEEL COMP 416SE RACE INSERT |
| MATERIAL | STEEL COMP 440C INNER LAYER |
| SHANK STYLE | EXTERNALLY THREADED |
| SHANK THREAD LENGTH | 1.9900 INCHES MINIMUM AND 2.0300 INCHES MAXIMUM |
| SPECIAL FEATURES | KEYWAY IN SHANK,0.125 IN. MIN 0.130 MAX W,0.0835 IN. MIN 0.0845 IN. MAX DEEP; 4 PUNCH LOCKS PER SIDE LOCATED ON 1.570 IN. DIA ON FACE OF ROD END BODY |
| STYLE DESIGNATOR | BALL TYPE |
| TEST DATA DOCUMENT | 81349-MIL-I-6866 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| THREAD CLASS | 3A |
| THREAD DIAMETER | 0.562 INCHES NOMINAL |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD SERIES DESIGNATOR | UNF |
| THREAD QUANTITY PER INCH | 18 |