|
|
|
National Stock Number:
3120-00-165-5948
Federal Supply Class:
3120
National Item Identification Number:
001655948
Description:
BUSHING,SLEEVE
Detail:
A tubular shaped unthreaded item with or without a flange at one end designed to be inserted into a hole to reduce the inside diameter of the hole and to protect the surrounding body structure from damage resulting from stress, strain, and/or vibration. The overall length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body. Includes items which are divided into two or more segments which includes 180 degrees (3.141 radians) or less of the bearing periphery. For items made of rubber, see BUSHING, NONMETALLIC. See also BEARING, SLEEVE; BUSHING, TAPERED; SPACER, SLEEVE; INSULATOR, BUSHING; and BUSHING, ELECTRICAL CONDUCTOR. Excludes BUSHING, DRILL, JIG.
|
Manufacturer Information:
| 2577233 | 17576 | GOODRICH CORP DBA GOODRICH CORP | | 2577233 | 55284 | HONEYWELL INTERNATIONAL INC. | | 2577233 | 6K4C8 | GOODRICH CORPORATION |
|
Techincal Specification:
| BODY INSIDE DIAMETER | 1.2000 INCHES MINIMUM AND 1.2400 INCHES MAXIMUM | | BODY OUTSIDE DIAMETER | 1.5640 INCHES MINIMUM AND 1.5649 INCHES MAXIMUM | | CORNER SHAPE | CHAMFERED INSIDE LEFT CORNER | | CORNER SHAPE | CHAMFERED OUTSIDE LEFT CORNER | | CORNER SHAPE | CHAMFERED OUTSIDE RIGHT CORNER | | CORNER SHAPE | RELIEF GROOVE LEFT FLANGE BODY CORNER | | CORNER SHAPE | SQUARE INSIDE RIGHT CORNER | | CORNER SHAPE | SQUARE LEFT FLANGE OUTSIDE RIGHT CORNER | | FLANGE OUTSIDE DIAMETER | 1.9900 INCHES MINIMUM AND 2.0100 INCHES MAXIMUM | | FLANGE WIDTH | 0.0900 INCHES MINIMUM AND 0.1100 INCHES MAXIMUM | | OVERALL LENGTH | 2.6800 INCHES MINIMUM AND 2.7200 INCHES MAXIMUM | | STYLE DESIGNATOR | SOLID, EXTERNAL FLANGE ONE END | | SURFACE FINISH | 125.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF BODY | | SURFACE FINISH | 125.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF FLANGE | | SURFACE FINISH | 125.0 MICROINCHES LEFT END SURFACE OF BODY AND FLANGE | | SURFACE FINISH | 125.0 MICROINCHES RIGHT END SURFACE OF BODY | | SURFACE FINISH | 125.0 MICROINCHES RIGHT END SURFACE OF LEFT FLANGE | | TEST DATA DOCUMENT | 81349-MIL-I-6866 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
|
|