|
|
|
National Stock Number:
3120-00-163-4226
Federal Supply Class:
3120
National Item Identification Number:
001634226
Description:
BEARING,WASHER,THRUST
Detail:
An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. It is designed for applications involving moving (kinetic) loads. Except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. The thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). Excludes straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. See also WASHER, FLAT and SPACER, SLEEVE.
|
Manufacturer Information:
| 02.01AT | 99167 | HAMILTON SUNDSTRAND CORPORATION | | 09.4140-HD-6F | 99167 | HAMILTON SUNDSTRAND CORPORATION | | 0C13.01-03J | 99167 | HAMILTON SUNDSTRAND CORPORATION | | 5100214 | 99167 | HAMILTON SUNDSTRAND CORPORATION |
|
Techincal Specification:
| DIAMETER | 1.4120 INCHES MINIMUM AND 1.4320 INCHES MAXIMUM | | CENTER HOLE SHAPE STYLE | ROUND | | CORNER SHAPE | SQUARE ALL CORNERS | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HARDNESS RATING | 50.0 ROCKWELL C MINIMUM OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6352 ASSN STD 1ST MATERIAL RESPONSE OVERALL OR AMS 6358 ASSN STD 2ND MATERIAL RESPONSE OVERALL OR AMS 6359 ASSN STD 3RD MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 4135 OVERALL OR STEEL COMP 8740 OVERALL OR STEEL COMP 4340 OVERALL | | PROPRIETARY CHARACTERISTICS | PACS | | OUTSIDE DIAMETER | 2.2350 INCHES MINIMUM AND 2.2450 INCHES MAXIMUM | | OVERALL THICKNESS | 0.0480 INCHES MINIMUM AND 0.0520 INCHES MAXIMUM | | WIDTH | 1.9950 INCHES NOMINAL | | STYLE DESIGNATOR | ROUND W/FLAT | | SURFACE FINISH | 250.0 MICROINCHES INSIDE DIAMETER SURFACE OF BODY | | SURFACE FINISH | 250.0 MICROINCHES LARGEST OUTSIDE DIAMETER | | SURFACE FINISH | 32.0 MICROINCHES LEFT SIDE | | SURFACE FINISH | 32.0 MICROINCHES RIGHT SIDE |
|
|