|
|
|
National Stock Number:
3120-00-159-0945
Federal Supply Class:
3120
National Item Identification Number:
001590945
Description:
BEARING,WASHER,THRUST
Detail:
An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. It is designed for applications involving moving (kinetic) loads. Except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. The thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). Excludes straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. See also WASHER, FLAT and SPACER, SLEEVE.
|
Manufacturer Information:
| 02-15855 | 99167 | HAMILTON SUNDSTRAND CORPORATION |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CORNER SHAPE | SQUARE ALL CORNERS | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | DIAMETER | 0.3760 INCHES MINIMUM AND 0.3860 INCHES MAXIMUM | | LUBRICATION FEATURE | GROOVE FLAT BEARING SURFACE | | OUTSIDE DIAMETER | 0.8750 INCHES NOMINAL | | OVERALL THICKNESS | 0.0480 INCHES MINIMUM AND 0.0500 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | PM 6024 OR PM 6005,77200 MFR REF SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | COPPER ALLOY OVERALL | | STYLE DESIGNATOR | ROUND | | SURFACE FINISH | 150.0 MICROINCHES INSIDE DIAMETER SURFACE OF BODY | | SURFACE FINISH | 150.0 MICROINCHES LARGEST OUTSIDE DIAMETER | | SURFACE FINISH | 25.0 MICROINCHES LEFT SIDE | | SURFACE FINISH | 25.0 MICROINCHES RIGHT SIDE |
|
|