|
|
|
National Stock Number:
3120-00-145-1733
Federal Supply Class:
3120
National Item Identification Number:
001451733
Description:
BEARING,WASHER,THRUST
Detail:
An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. It is designed for applications involving moving (kinetic) loads. Except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. The thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). Excludes straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. See also WASHER, FLAT and SPACER, SLEEVE.
|
Manufacturer Information:
| 356355 | 07524 | DOVER PUMPS & PROCESS SOLUTIONS SEGMENT INC | | E1902PC46 | 07524 | DOVER PUMPS & PROCESS SOLUTIONS SEGMENT INC | | E1903PC46 | 07524 | DOVER PUMPS & PROCESS SOLUTIONS SEGMENT INC | | E2103PC46 | 07524 | DOVER PUMPS & PROCESS SOLUTIONS SEGMENT INC | | E2104PC46 | 07524 | DOVER PUMPS & PROCESS SOLUTIONS SEGMENT INC | | E2325PC46 | 07524 | DOVER PUMPS & PROCESS SOLUTIONS SEGMENT INC | | E2327PC46 | 07524 | DOVER PUMPS & PROCESS SOLUTIONS SEGMENT INC | | E2394PC46 | 07524 | DOVER PUMPS & PROCESS SOLUTIONS SEGMENT INC | | TW201A | 07524 | DOVER PUMPS & PROCESS SOLUTIONS SEGMENT INC | | TW201ACI | 07524 | DOVER PUMPS & PROCESS SOLUTIONS SEGMENT INC |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CORNER SHAPE | SQUARE ALL CORNERS | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | DIAMETER | 2.7500 INCHES MINIMUM AND 2.7520 INCHES MAXIMUM | | OUTSIDE DIAMETER | 3.7460 INCHES MINIMUM AND 3.7480 INCHES MAXIMUM | | OVERALL THICKNESS | 0.1880 INCHES MINIMUM AND 0.1885 INCHES MAXIMUM | | MATERIAL | IRON CAST OVERALL | | STYLE DESIGNATOR | ROUND | | SURFACE CONDITION | GROUND |
|
|