| ALIGNMENT TYPE | RIGID |
| BEARING SEAL TYPE | CONTACT |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSE |
| LUBRICATION MATERIAL | GREASE |
| OUTER RING WIDTH | 0.4640 INCHES MINIMUM AND 0.4690 INCHES MAXIMUM |
| OVERALL LENGTH | 2.3500 INCHES NOMINAL |
| OVERALL OUTSIDE DIAMETER | 0.8745 INCHES MINIMUM AND 0.8760 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | SAE ASSN STD SINGLE MATERIAL RESPONSE OUTER RING |
| MATERIAL DOCUMENT AND CLASSIFICATION | SAE ASSN STD SINGLE MATERIAL RESPONSE ROLLER |
| MATERIAL DOCUMENT AND CLASSIFICATION | SAE ASSN STD SINGLE MATERIAL RESPONSE STUD |
| MATERIAL | PLASTIC ACETAL OR PLASTIC POLYAMIDE SEAL |
| MATERIAL | STEEL COMP E52100 OUTER RING |
| MATERIAL | STEEL COMP E52100 ROLLER |
| MATERIAL | STEEL COMP E52100 STUD |
| MATERIAL | STEEL END PLATE |
| NOMINAL THREAD SIZE | 0.3750 INCHES |
| SEAL QUANTITY | 2 |
| SPECIAL FEATURES | COTTER PIN HOLE IN STUD 0.10 IN. FROM STUD END; 0.106 IN DIA |
| SPECIFICATION/STANDARD DATA | 80205-NAS562 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| STANDARD TOLERANCE DESIGNATION | AFBMA STD TOLERANCE FOR CAN FOLLWER NEEDLE BEARING |
| STUD LENGTH | 1.8590 INCHES NOMINAL |
| STYLE DESIGNATOR | CAM FOLLOWER |
| STUD DIAMETER | 0.3735 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-C-320,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OUTER RING |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE END PLATE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE STUD |
| SURFACE TREATMENT | CADMIUM END PLATE |
| SURFACE TREATMENT | CADMIUM STUD |
| SURFACE TREATMENT | CHROMIUM OUTER RING |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.3590 INCHES NOMINAL |
| THREAD SERIES DESIGNATOR | UNJF |
| THREAD QUANTITY PER INCH | 24 |