| BORE DIAMETER | 6.5000 INCHES NOMINAL |
| BORE SHAPE | STRAIGHT |
| CONTACT ANGLE | 27.0 DEGREES MINIMUM AND 33.0 DEGREES MAXIMUM |
| INNER RING WIDTH | 6.6890 INCHES NOMINAL |
| LOAD DIRECTION | ANGULAR |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | PML-79,CAGEC 98354 MFR REF SINGLE MATERIAL RESPONSE AND FREON TF,CAGEC 88559 MFR REF SINGLE MATERIAL RESPONSE |
| LUBRICATION MATERIAL | OIL LUBRICATING |
| OUTER RING WIDTH | 6.8170 INCHES NOMINAL |
| OVERALL OUTSIDE DIAMETER | 7.0000 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6444 ASSN STD SINGLE MATERIAL RESPONSE OR MIL-B-1083 MIL SPEC SINGLE MATERIAL RESPONSE OR 66 FED STD SINGLE MATERIAL RESPONSE BALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6444 ASSN STD SINGLE MATERIAL RESPONSE OR MIL-B-1083 MIL SPEC SINGLE MATERIAL RESPONSE OR 66 FED STD SINGLE MATERIAL RESPONSE INNER RING |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6444 ASSN STD SINGLE MATERIAL RESPONSE OR MIL-B-1083 MIL SPEC SINGLE MATERIAL RESPONSE OR 66 FED STD SINGLE MATERIAL RESPONSE OUTER RING |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-P-79,TYPE FBE MIL SPEC SINGLE MATERIAL RESPONSE RETAINER |
| MATERIAL | COTTON AND PLASTIC PHENOLIC RETAINER |
| MATERIAL | STEEL COMP E52100 BALL |
| MATERIAL | STEEL COMP E52100 INNER RING |
| MATERIAL | STEEL COMP E52100 OUTER RING |
| RETAINER FABRICATION METHOD | MOLDED |
| SPECIAL FEATURES | VACUUM IMPERGNATED WITH SPECIFIED LUBE |
| STANDARD TOLERANCE DESIGNATION | ABEC NO.7 |
| SURFACE FINISH | GROUND |