|
|
|
National Stock Number:
3110-01-270-2803
Federal Supply Class:
3110
National Item Identification Number:
012702803
Description:
PLATE,RETAINING,BEARING
Detail:
A comparatively flat rigid item, with or without a centrally located aperture, designed to hold an annular bearing or a sleeve bearing in a fitted inclosure. It must have drilled and/or tapped holes for mounting purposes. Excludes END BELL, ELECTRICAL ROTATING EQUIPMENT.
|
Manufacturer Information:
| 865B1108 | 00994 | COLUMBUS JACK CORPORATION |
|
Techincal Specification:
| DISTANCE FROM HORIZONTAL CENTERLINE TO CENTER OF RIGHT HOLE | 0.625 INCHES NOMINAL | | DISTANCE FROM VERTICAL CENTERLINE TO CENTER OF RIGHT HOLE | 0.625 INCHES NOMINAL | | APERTURE DIAMETER | 0.755 INCHES MINIMUM AND 0.760 INCHES MAXIMUM | | CROSS-SECTIONAL SHAPE STYLE | FLAT W/APERTURE | | DISTANCE BETWEEN HOLES ALONG LENGTH | 1.250 INCHES NOMINAL | | DISTANCE BETWEEN HOLES ALONG WIDTH | 1.250 INCHES NOMINAL | | LENGTH | 2.750 INCHES NOMINAL | | OVERALL THICKNESS | 0.375 INCHES NOMINAL | | MATERIAL | STEEL OVERALL | | MOUNTING HOLE ARRANGEMENT STYLE | FOUR HOLES | | MOUNTING HOLE TYPE | ROUND, THREADED | | NOMINAL THREAD SIZE | 0.250 INCHES | | SPECIAL FEATURES | BORE CORNERS ARE CHAMFERED 0.060 IN. LONG BY 45 DEGREES | | WIDTH | 2.000 INCHES NOMINAL | | STYLE DESIGNATOR | RECTANGLE | | SURFACE FINISH | 63.0 MICROINCHES BORE | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM AND CHROMATE OVERALL | | THREAD QUANTITY PER INCH | 28 | | THREAD SERIES DESIGNATOR | UNF |
|
|