| ALIGNMENT TYPE | RIGID |
| BORE DIAMETER | 0.7498 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM |
| BORE SHAPE | STRAIGHT |
| INTERNAL CLEARANCE | 0.0007 INCHES MINIMUM RADIAL AND 0.0009 INCHES MAXIMUM RADIAL |
| LOAD DIRECTION | ANGULAR |
| LUBRICATION MATERIAL | OIL |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-L-6085 MIL SPEC SINGLE MATERIAL RESPONSE |
| OUTER RING WIDTH | 0.3490 INCHES MINIMUM AND 0.3500 INCHES MAXIMUM |
| OVERALL OUTSIDE DIAMETER | 0.9998 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | 66,300 SERIES FED STD ALL MATERIAL RESPONSES SHIELD |
| MATERIAL DOCUMENT AND CLASSIFICATION | 66,300 SERIES FED STD ALL MATERIAL RESPONSES SNAP RING |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5630 ASSN STD SINGLE MATERIAL RESPONSE BALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5630 ASSN STD SINGLE MATERIAL RESPONSE INNER RING |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-P-79,TYPE FBE MIL SPEC SINGLE MATERIAL RESPONSE RETAINER |
| MATERIAL | COTTON AND PLASTIC PHENOLIC RETAINER |
| MATERIAL | STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 304 SHIELD |
| MATERIAL | STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 304 SNAP RING |
| MATERIAL | STEEL COMP 440C BALL |
| MATERIAL | STEEL COMP 440C OUTER RING |
| MATERIAL | STEEL COMP 440C INNER RING |
| RETAINER FABRICATION METHOD | MACHINED |
| SHIELD QUANTITY | 2 |
| STANDARD TOLERANCE DESIGNATION | ABEC NO. 7T |
| STYLE DESIGNATOR | NON-LOADING GROOVE, NON-SEPARABLE |
| SURFACE FINISH | GROUND |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35,TYPE 1,TYPE 2,TYPE 3,OR TYPE 6 FED SPEC SINGLE TREATMENT RESPONSE SHIELD |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35,TYPE 1,TYPE 2,TYPE 3,OR TYPE 6 FED SPEC SINGLE TREATMENT RESPONSE SNAP RING |
| SURFACE TREATMENT | PASSIVATE SNAP RING |
| SURFACE TREATMENT | PASSIVATE SHIELD |