| BORE DIAMETER | 0.3750 INCHES NOMINAL |
| BORE SHAPE | STRAIGHT |
| FLANGE OUTSIDE DIAMETER | 0.9690 INCHES NOMINAL |
| FLANGE WIDTH | 0.0620 INCHES NOMINAL |
| INTERNAL CLEARANCE | 0.0005 INCHES MINIMUM RADIAL AND 0.0008 INCHES MAXIMUM RADIAL |
| LOAD DIRECTION | RADIAL |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | SM-C-808343,CAGEC 80063 MFR REF SINGLE MATERIAL RESPONSE |
| LUBRICATION MATERIAL | GREASE |
| OUTER RING OUTSIDE DIAMETER | 0.8750 INCHES NOMINAL |
| OVERALL WIDTH | 0.2802 INCHES MINIMUM AND 0.2812 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE BALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE INNER RING |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OUTER RING |
| MATERIAL | STEEL CORROSION RESISTING RETAINER |
| MATERIAL | STEEL CORROSION RESISTING SHIELD |
| MATERIAL | STEEL COMP 440C BALL |
| MATERIAL | STEEL COMP 440C OUTER RING |
| MATERIAL | STEEL COMP 440C INNER RING |
| RETAINER FABRICATION METHOD | PRESSED |
| SHIELD QUANTITY | 2 |
| SPECIAL FEATURES | BEARING SHALL BE 5 PCT TO 10 PCT FILLED WITH WITH GREASE |
| STANDARD TOLERANCE DESIGNATION | ABEC NO. 7P |
| STYLE DESIGNATOR | NON-LOADING GROOVE, NON-SEPARABLE |
| SURFACE FINISH | GROUND |