| BEARING SEAL TYPE | CONTACT |
| FEATURES PROVIDED | LUBRICATION GROOVE AND LUBRICATION HOLE |
| LUBRICATION MATERIAL | GREASE |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSE |
| OUTER RING WIDTH | 0.7500 INCHES NOMINAL |
| OVERALL LENGTH | 2.0312 INCHES NOMINAL |
| OVERALL OUTSIDE DIAMETER | 1.3750 INCHES NOMINAL |
| MATERIAL | PLASTIC ACETAL OR PLASTIC POLYHEXAMETHYLENE ADIPAMIDE SEAL |
| MATERIAL | STEEL COMP 8620 OR STEEL COMP E50100 OR STEEL COMP E51100 OR STEEL COMP E52100 END PLATE |
| MATERIAL | STEEL COMP 8620 OR STEEL COMP E50100 OR STEEL COMP E51100 OR STEEL COMP E52100 OUTER RING |
| MATERIAL | STEEL COMP 8620 OR STEEL COMP E50100 OR STEEL COMP E51100 OR STEEL COMP E52100 ROLLER |
| MATERIAL | STEEL COMP 8620 OR STEEL COMP E50100 OR STEEL COMP E51100 OR STEEL COMP E52100 STUD |
| NOMINAL THREAD SIZE | 0.500 INCHES |
| SEAL QUANTITY | 2 |
| SPECIAL FEATURES | CROWNED OD |
| STANDARD TOLERANCE DESIGNATION | AFBMA STD TOLERANCE FOR CAN FOLLWER NEEDLE BEARING |
| STUD DIAMETER | 0.5000 INCHES NOMINAL |
| STUD LENGTH | 1.2500 INCHES NOMINAL |
| STYLE DESIGNATOR | CAM FOLLOWER |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-C-320,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OUTER RING |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 1,CLASS 2 FED SPEC 1ST TREATMENT RESPONSE OR MIL-C-13924 MIL SPEC 2ND TREATMENT RESPONSE STUD |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 1,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE END PLATE EXPOSED SURFACES |
| SURFACE TREATMENT | CHROMIUM OUTER RING |
| SURFACE TREATMENT | CADMIUM OR OXIDE STUD |
| SURFACE TREATMENT | CADMIUM END PLATE EXPOSED SURFACES |
| THREAD CLASS | 2A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.6250 INCHES NOMINAL |
| THREAD QUANTITY PER INCH | 20 |
| THREAD SERIES DESIGNATOR | UNF |