| BORE DIAMETER | 0.3123 INCHES MINIMUM AND 0.3125 INCHES MAXIMUM |
| BORE SHAPE | STRAIGHT |
| FLANGE OUTSIDE DIAMETER | 0.5469 INCHES NOMINAL |
| FLANGE WIDTH | 0.0312 INCHES NOMINAL |
| FUNCTIONAL DESCRIPTION | LOW TORQUE STARTUP |
| INNER RING WIDTH | 0.1865 INCHES MINIMUM AND 0.1875 INCHES MAXIMUM |
| INTERNAL CLEARANCE | 0.0002 INCHES MINIMUM RADIAL AND 0.0008 INCHES MAXIMUM RADIAL |
| LOAD DIRECTION | RADIAL |
| LUBRICATION MATERIAL | OIL LUBRICATING |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-L-6085 MIL SPEC SINGLE MATERIAL RESPONSE AND ANDEROL 401D MFR REF SINGLE MATERIAL RESPONSE |
| OUTER RING OUTSIDE DIAMETER | 0.4998 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| OUTER RING WIDTH | 0.1552 INCHES MINIMUM AND 0.1562 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | AISI/SAE J405,UNS S41000 ASSN STD SINGLE MATERIAL RESPONSE RETAINER |
| MATERIAL DOCUMENT AND CLASSIFICATION | AISI/SAE J405,UNS S41000 ASSN STD SINGLE MATERIAL RESPONSE SHIELD |
| MATERIAL DOCUMENT AND CLASSIFICATION | AISI/SAE J405,UNS S44004 ASSN STD SINGLE MATERIAL RESPONSE BALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | AISI/SAE J405,UNS S44004 ASSN STD SINGLE MATERIAL RESPONSE INNER RING |
| MATERIAL DOCUMENT AND CLASSIFICATION | AISI/SAE J405,UNS S44004 ASSN STD SINGLE MATERIAL RESPONSE OUTER RING |
| MATERIAL | STEEL COMP 410 RETAINER |
| MATERIAL | STEEL COMP 410 SHIELD |
| MATERIAL | STEEL COMP 440C BALL |
| MATERIAL | STEEL COMP 440C OUTER RING |
| MATERIAL | STEEL COMP 440C INNER RING |
| RELATIONSHIP TO SIMILAR EQUIPMENT | SIMILAR TO RN 81349-022X31201X2131 EXCEPT STAMPED CROWN STNLS RTN |
| RETAINER FABRICATION METHOD | MACHINED |
| SHIELD QUANTITY | 2 |
| STANDARD TOLERANCE DESIGNATION | ABEC NO. 7P |
| STYLE DESIGNATOR | NON-LOADING GROOVE, NON-SEPARABLE |
| SURFACE FINISH | GROUND |