|
|
|
National Stock Number:
3110-01-260-8970
Federal Supply Class:
3110
National Item Identification Number:
012608970
Description:
BEARING,BALL,ANNULAR
Detail:
A cylindrical device in which the inner or outer ring turns upon a single or double row of hardened balls which roll easily between the two rings, thus minimizing friction. For items with faces specially ground for duplex mounting see BEARING, BALL, DUPLEX. Excludes BEARING, BALL, AIRFRAME.
|
Manufacturer Information:
| M81793-BLRPANSHED71ES1 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | M81793/04-MD1J2D1X1 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-B-81793/4 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-B-81793C | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | SR8-FF4CG37-ABEC7 | 70854 | SCHAEFFLER AEROSPACE USA CORP | | SR8-FFCG37-ABEC7 | 70854 | SCHAEFFLER AEROSPACE USA CORP | | SR8FFX4K7CG-37 | 70854 | SCHAEFFLER AEROSPACE USA CORP |
|
Techincal Specification:
| BEARING SEAL TYPE | CONTACT | | BORE DIAMETER | 0.5000 INCHES NOMINAL | | BORE SHAPE | STRAIGHT | | CALIBRATION DESIGNATOR | C | | INTERNAL CLEARANCE | 0.0003 INCHES MINIMUM RADIAL AND 0.0005 INCHES MAXIMUM RADIAL | | LOAD DIRECTION | RADIAL | | LUBRICATION MATERIAL | GREASE | | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-25013 MIL SPEC SINGLE MATERIAL RESPONSE | | OVERALL OUTSIDE DIAMETER | 1.1250 INCHES NOMINAL | | OVERALL WIDTH | 0.3125 INCHES NOMINAL | | MATERIAL | RUBBER SYNTHETIC SEAL | | MATERIAL | STEEL CORROSION RESISTING BALL | | MATERIAL | STEEL CORROSION RESISTING INNER RING | | MATERIAL | STEEL CORROSION RESISTING OUTER RING | | MATERIAL | STEEL CORROSION RESISTING RETAINER | | RETAINER FABRICATION METHOD | PRESSED | | SEAL QUANTITY | 2 | | STANDARD TOLERANCE DESIGNATION | ABEC NO.7 | | STYLE DESIGNATOR | NON-LOADING GROOVE, NON-SEPARABLE | | SURFACE FINISH | GROUND |
|
|