| ALIGNMENT TYPE | RIGID |
| BORE DIAMETER | 3.7492 INCHES MINIMUM AND 3.7500 INCHES MAXIMUM |
| INNER RING WIDTH | 0.4950 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| LUBRICATION MATERIAL | GREASE |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE |
| OUTER RING WIDTH | 0.2940 INCHES MINIMUM AND 0.2990 INCHES MAXIMUM |
| OVERALL OUTSIDE DIAMETER | 4.6240 INCHES MINIMUM AND 4.6250 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE INNER RACE |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE OUTER RACE |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-633 FED SPEC SINGLE MATERIAL RESPONSE END PLATE |
| MATERIAL DOCUMENT AND CLASSIFICATION | SAE FED STD SINGLE MATERIAL RESPONSE ROLLER |
| MATERIAL | STEEL COMP 1070 OR STEEL COMP 1074 OR STEEL COMP 1078 OR STEEL COMP 1080 OR STEEL COMP 1084 OR STEEL COMP 1085 OR STEEL COMP 1086 OR STEEL COMP 1090 END PLATE |
| MATERIAL | STEEL COMP E52100 INNER RACE |
| MATERIAL | STEEL COMP E52100 OUTER RACE |
| MATERIAL | STEEL COMP E52100 ROLLER |
| SPECIFICATION/STANDARD DATA | 81205-BACB10B MANUFACTURERS STANDARD |
| STANDARD TOLERANCE DESIGNATION | AFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS |
| SPECIAL FEATURES | RETAINING RINGS,BRASS QQ-W-321C OR CORROSION RESIS STEEL QQ-W-423 |
| STYLE DESIGNATOR | AIRFRAME, HARDENED AND GROUND, NON-SEPARABLE |
| SURFACE FINISH | GROUND |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 1,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE EXPOSED SURFACES AS MOUNTED |
| SURFACE TREATMENT | CADMIUM EXPOSED SURFACES AS MOUNTED |