| ALIGNMENT TYPE | RIGID |
| BEARING SEAL TYPE | CONTACT |
| FEATURES PROVIDED | LUBRICATION HOLE AND LUBRICATION GROOVE |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE |
| LUBRICATION MATERIAL | GREASE |
| OUTER RING WIDTH | 0.6200 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM |
| OVERALL LENGTH | 1.4050 INCHES NOMINAL |
| OVERALL OUTSIDE DIAMETER | 1.1240 INCHES MINIMUM AND 1.1254 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5630 ASSN STD SINGLE MATERIAL RESPONSE WASHER |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5630 ASSN STD SINGLE MATERIAL RESPONSE OUTER RING |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5630 ASSN STD SINGLE MATERIAL RESPONSE ROLLER |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6440 ASSN STD 1ST MATERIAL RESPONSE AND AMS 6274 ASSN STD 2ND MATERIAL RESPONSE STUD |
| MATERIAL DOCUMENT AND CLASSIFICATION | L-P-410 FED SPEC SINGLE MATERIAL RESPONSE SEAL |
| MATERIAL | PLASTIC POLYHEXAMETHYLENE ADIPAMIDE SEAL |
| MATERIAL | STEEL COMP 440C OUTER RING |
| MATERIAL | STEEL COMP 440C ROLLER |
| MATERIAL | STEEL COMP 440C WASHER |
| MATERIAL | STEEL COMP E52100 OR STEEL COMP 8620 STUD |
| NOMINAL THREAD SIZE | 0.6250 INCHES |
| SEAL QUANTITY | 2 |
| SPECIAL FEATURES | HEX HOLE 0.1875 MIN |
| STUD LENGTH | 0.7500 INCHES NOMINAL |
| STYLE DESIGNATOR | CAM FOLLOWER |
| STUD DIAMETER | 0.6250 INCHES MINIMUM AND 0.6264 INCHES MAXIMUM |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS 2406 ASSN STD SINGLE TREATMENT RESPONSE ALL EXTERNAL/EXPOSED METAL SURFACES |
| SURFACE TREATMENT | CHROMIUM ALL EXTERNAL/EXPOSED METAL SURFACES |
| THREAD CLASS | 2A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.6250 INCHES NOMINAL |
| THREAD SERIES DESIGNATOR | UNF |
| THREAD QUANTITY PER INCH | 18 |