| ALIGNMENT TYPE | RIGID |
| BORE DIAMETER | 0.1875 INCHES NOMINAL |
| BORE SHAPE | STRAIGHT |
| CALIBRATION DESIGNATOR | C44 |
| FLANGE OUTSIDE DIAMETER | 0.5650 INCHES NOMINAL |
| FLANGE WIDTH | 0.0420 INCHES NOMINAL |
| INTERNAL CLEARANCE | 0.0008 INCHES MINIMUM RADIAL AND 0.0011 INCHES MAXIMUM RADIAL |
| LOAD DIRECTION | RADIAL |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-L-6085 MIL SPEC SINGLE MATERIAL RESPONSE |
| LUBRICATION MATERIAL | OIL |
| OUTER RING OUTSIDE DIAMETER | 0.5000 INCHES NOMINAL |
| OVERALL WIDTH | 0.1960 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE BALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE INNER RING |
| MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE OUTER RING |
| MATERIAL | STEEL COMP 440C INNER RING |
| MATERIAL | STEEL COMP 440C OUTER RING |
| MATERIAL | STEEL COMP 440C BALL |
| MATERIAL | STEEL CORROSION RESISTING RETAINER |
| MATERIAL | STEEL CORROSION RESISTING SHIELD |
| RETAINER FABRICATION METHOD | PRESSED |
| SHIELD QUANTITY | 2 |
| SPECIAL FEATURES | LOW PEAK TORGUE |
| STANDARD TOLERANCE DESIGNATION | ABEC NO. 7P |
| STYLE DESIGNATOR | NON-LOADING GROOVE, NON-SEPARABLE |
| SURFACE FINISH | GROUND |