| DISTANCE FROM HORIZONTAL CENTERLINE TO CENTER OF LOWER HOLE | 0.480 INCHES NOMINAL |
| DISTANCE FROM VERTICAL CENTERLINE TO CENTER OF RIGHT HOLE | 0.480 INCHES NOMINAL |
| BOLT CIRCLE HOLE QUANTITY | 4 |
| COUNTERBORE DEPTH | 0.400 INCHES NOMINAL |
| COUNTERBORE DIAMETER | 1.750 INCHES NOMINAL |
| CROSS-SECTIONAL SHAPE STYLE | RAISED SURFACE W/O APERTURE |
| DISTANCE BETWEEN HOLES ALONG LENGTH | 0.960 INCHES NOMINAL |
| DISTANCE BETWEEN HOLES ALONG WIDTH | 0.960 INCHES NOMINAL |
| INSIDE RAISED SURFACE DIAMETER | 1.4989 INCHES NOMINAL |
| OUTSIDE DIAMETER | 1.9994 INCHES MINIMUM AND 2.0003 INCHES MAXIMUM |
| OUTSIDE RAISED SURFACE DIAMETER | 1.7484 INCHES MINIMUM AND 1.7493 INCHES MAXIMUM |
| OVERALL THICKNESS | 0.800 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL COMP XM-13 OVERALL |
| MINOR THICKNESS | 0.250 INCHES NOMINAL |
| MOUNTING HOLE DIAMETER | 0.327 INCHES MINIMUM AND 0.334 INCHES MAXIMUM |
| MOUNTING HOLE ARRANGEMENT STYLE | FOUR HOLES |
| MOUNTING HOLE TYPE | ROUND, UNTHREADED |
| SPECIAL FEATURES | 63.0 MICROIN FIN. ON RAISED SURF. OD,8.0 MICROIN FIN. ON REMAINING OD; PAINTED SURF. WHITE |
| RAISED SURFACE HEIGHT | 0.150 INCHES NOMINAL |
| STYLE DESIGNATOR | ROUND |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | 595 FED STD SINGLE TREATMENT RESPONSE OUTER FACE AS MOUNTED |
| SURFACE TREATMENT | PAINT OUTER FACE AS MOUNTED |
| TEST DATA DOCUMENT | 36659-LC+72-1076 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |