| DISTANCE FROM HORIZONTAL CENTERLINE TO CENTER OF RIGHT HOLE | 1.7560 INCHES NOMINAL |
| DISTANCE FROM VERTICAL CENTERLINE TO CENTER OF RIGHT HOLE | 1.9350 INCHES NOMINAL |
| CROSS-SECTIONAL SHAPE STYLE | RAISED SURFACE W/O APERTURE |
| DISTANCE BETWEEN HOLES ALONG LENGTH | 3.6910 INCHES NOMINAL |
| DISTANCE BETWEEN HOLES ALONG WIDTH | 3.6910 INCHES NOMINAL |
| LUG QUANTITY | 4 |
| LUG WIDTH | 0.6600 INCHES MINIMUM AND 0.7000 INCHES MAXIMUM |
| OUTSIDE DIAMETER | 3.3500 INCHES MINIMUM AND 3.3900 INCHES MAXIMUM |
| OUTSIDE RAISED SURFACE DIAMETER | 0.6600 INCHES MINIMUM AND 0.7000 INCHES MAXIMUM |
| OVERALL THICKNESS | 0.1300 INCHES MINIMUM AND 0.1450 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6415 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL COMP 4340 OVERALL |
| MOUNTING HOLE DIAMETER | 0.2960 INCHES MINIMUM AND 0.3030 INCHES MAXIMUM |
| MOUNTING HOLE ARRANGEMENT STYLE | FOUR HOLES |
| MOUNTING HOLE TYPE | ROUND, UNTHREADED |
| RAISED SURFACE HEIGHT | 0.0550 INCHES MINIMUM AND 0.0600 INCHES MAXIMUM |
| RADIUS FROM CENTER OF PLATE TO END OF LUG | 2.2100 INCHES MINIMUM AND 2.2300 INCHES MAXIMUM |
| SPECIAL FEATURES | ITEM HAS TWO KEYS,180 DEGREES APART,WHICH MEASURE 0.4700 IN. MIN. AND0.4800 IN. MAX.; ITEM USED ON THE F101-GE-102 ENGINE |
| STYLE DESIGNATOR | ROUND WITH LUGS |