| BEARING PRELOAD RATING | 30.0 POUNDS MINIMUM AND 40.0 POUNDS MAXIMUM |
| BORE DIAMETER | 2.4996 INCHES MINIMUM AND 2.5000 INCHES MAXIMUM |
| CONTACT ANGLE | 30.0 DEGREES NOMINAL |
| LOAD DIRECTION | ANGULAR |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | 13084653,FSCM 58260 MFR REF SINGLE MATERIAL RESPONSE |
| LUBRICATION MATERIAL | OIL |
| OVERALL OUTSIDE DIAMETER | 2.9996 INCHES MINIMUM AND 3.0000 INCHES MAXIMUM |
| OVERALL WIDTH | 1.2200 INCHES MINIMUM AND 1.2500 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE BALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE INNER RING |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OUTER RING |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE SPACER |
| MATERIAL | PLASTIC PHENOLIC RETAINER |
| MATERIAL | STEEL COMP 440C BALL |
| MATERIAL | STEEL COMP 440C INNER RING |
| MATERIAL | STEEL COMP 440C OUTER RING |
| MATERIAL | STEEL COMP 440C SPACER |
| SPECIAL FEATURES | 8 DROPS OF SPECIFIED LUBRICANT EVENLY SPACED FROM A NUMBER 25 OR 26 NEEDLE |
| RETAINER FABRICATION METHOD | MACHINED |
| SURFACE FINISH | GROUND |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | ASTM A-380 ASSN STD SINGLE TREATMENT RESPONSE BALL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | ASTM A-380 ASSN STD SINGLE TREATMENT RESPONSE INNER RING |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | ASTM A-380 ASSN STD SINGLE TREATMENT RESPONSE OUTER RING |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | ASTM A-380 ASSN STD SINGLE TREATMENT RESPONSE SPACER |
| SURFACE TREATMENT | PASSIVATE BALL |
| SURFACE TREATMENT | PASSIVATE INNER RING |
| SURFACE TREATMENT | PASSIVATE OUTER RING |
| SURFACE TREATMENT | PASSIVATE SPACER |