ALIGNMENT TYPE | SELF-ALIGNING |
BEARING SEAL TYPE | CONTACT |
BORE DIAMETER | 0.3125 INCHES NOMINAL |
INTERNAL CLEARANCE | 0.0002 INCHES MINIMUM RADIAL AND 0.0010 INCHES MAXIMUM RADIAL |
LENGTH FROM BORE CENTER TO SHANK END | 2.3200 INCHES NOMINAL |
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE |
LUBRICATION MATERIAL | GREASE |
MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6294 ASSN STD SINGLE MATERIAL RESPONSE ROD END BODY |
MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE INNER RING |
MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE ROLLER |
MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE SHIELD |
MATERIAL | PLASTIC POLYTETRAFLUOROETHYLENE SEAL AND GLASS FIBER SEAL |
MATERIAL | STEEL COMP 430 SHIELD |
MATERIAL | STEEL COMP 4620 ROD END BODY |
MATERIAL | STEEL COMP E52100 INNER RING |
MATERIAL | STEEL COMP E52100 ROLLER |
INNER RING WIDTH | 0.5930 INCHES NOMINAL |
PROPRIETARY CHARACTERISTICS | PACS |
NOMINAL THREAD SIZE | 0.438 INCHES |
OUTER RING WIDTH | 0.3400 INCHES NOMINAL |
OVERALL LENGTH | 2.9950 INCHES NOMINAL |
OVERALL OUTSIDE DIAMETER | 1.3500 INCHES NOMINAL |
SEAL QUANTITY | 2 |
SELF-ALIGNMENT ANGLE | 10.00 DEGREES NOMINAL |
SELF-ALIGNMENT LOCATION | INTERNAL |
SHANK DIAMETER | 0.4375 INCHES NOMINAL |
SHANK STYLE | EXTERNALLY THREADED W/SLOT |
SHANK THREAD LENGTH | 1.2400 INCHES NOMINAL |
SHIELD QUANTITY | 2 |
SPECIAL FEATURES | NAS 559 KEYWAY SLOT IN SHANK |
STANDARD TOLERANCE DESIGNATION | AFBMA STD TOLERANCE FOR ROD END ROLLER BEARING |
STYLE DESIGNATOR | SINGLE ROW, CONCAVE ROLLERS |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 1,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE ALL EXTERNAL/EXPOSED METAL SURFACES |
SURFACE TREATMENT | CADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES |
TEST DATA DOCUMENT | 81349-MIL-I-6868 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
THREAD CLASS | 3A |
THREAD DIRECTION | RIGHT-HAND |
THREAD QUANTITY PER INCH | 20 |
THREAD SERIES DESIGNATOR | UNJF |