| ALIGNMENT TYPE | SELF-ALIGNING |
| BEARING SEAL TYPE | CONTACT |
| BORE DIAMETER | 0.6250 INCHES MINIMUM |
| FEATURES PROVIDED | ALIGNING RING |
| INNER RING WIDTH | 0.4035 INCHES MINIMUM |
| INTERNAL CLEARANCE | 0.0010 INCHES MAXIMUM RADIAL |
| LOAD DIRECTION | RADIAL |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-21164 MIL SPEC SINGLE MATERIAL RESPONSE |
| LUBRICATION MATERIAL | GREASE |
| OUTER RING WIDTH | 0.3415 INCHES MINIMUM |
| OVERALL OUTSIDE DIAMETER | 1.5000 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 3652 ASSN STD SINGLE MATERIAL RESPONSE SEAL |
| MATERIAL | PLASTIC POLYTETRAFLUOROETHYLENE SEAL |
| MATERIAL | STEEL CORROSION RESISTING ALIGNMENT RING |
| MATERIAL | STEEL CORROSION RESISTING BALL |
| MATERIAL | STEEL CORROSION RESISTING INNER RING |
| MATERIAL | STEEL CORROSION RESISTING OUTER RING |
| SPECIAL FEATURES | 20.0 PERCENT FULL OF SPECIFIED GREASE |
| SEAL QUANTITY | 2 |
| SELF-ALIGNMENT LOCATION | EXTERNAL |
| SPECIFICATION/STANDARD DATA | 78567-NF203535 MANUFACTURERS SOURCE CONTROL |
| STANDARD TOLERANCE DESIGNATION | AFBMA STD TOLERANCE FOR AIRFRAME BALL BEARINGS |
| STYLE DESIGNATOR | SINGLE ROW, EXTERNAL SELF ALIGNING, W/ALIGNING RING |
| SUPPLEMENTARY FEATURES | THE ACTUAL VENDOR CAGE CODE FOR SOURCE CONTROL DRAWING IS 78567 BUT THAT CAGE CODE IS OBSOLETE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 1,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE ALL EXTERNAL/EXPOSED METAL SURFACES |
| SURFACE TREATMENT | CADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES |