| ALIGNMENT TYPE | RIGID |
| BORE DIAMETER | 0.1873 INCHES MINIMUM AND 0.1875 INCHES MAXIMUM |
| BORE SHAPE | STRAIGHT |
| FLANGE OUTSIDE DIAMETER | 0.4220 INCHES NOMINAL |
| FLANGE WIDTH | 0.0310 INCHES NOMINAL |
| INNER RING WIDTH | 0.1552 INCHES MINIMUM AND 0.1562 INCHES MAXIMUM |
| INTERNAL CLEARANCE | 0.0002 INCHES MINIMUM RADIAL AND 0.0005 INCHES MAXIMUM RADIAL |
| LOAD DIRECTION | RADIAL |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIS-30520,FSCM 58260 MFR REF SINGLE MATERIAL RESPONSE |
| LUBRICATION MATERIAL | OIL |
| OUTER RING OUTSIDE DIAMETER | 0.3748 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM |
| OUTER RING WIDTH | 0.1240 INCHES MINIMUM AND 0.1250 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | MINAPAR 2,FSCM 40920 MFR REF SINGLE MATERIAL RESPONSE RETAINER |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE BALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE INNER RING |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OUTER RING |
| MATERIAL | PLASTIC RETAINER |
| MATERIAL | STEEL COMP 440C INNER RING |
| MATERIAL | STEEL COMP 440C OUTER RING |
| MATERIAL | STEEL COMP 440C BALL |
| MATERIAL | STEEL CORROSION RESISTING SHIELD |
| RETAINER FABRICATION METHOD | MOLDED |
| SHIELD QUANTITY | 2 |
| SPECIAL FEATURES | DIP AND CENTRIFUGE AT 200 G FOR 1 PORM 0.1 MINUTE IN SPECIFIED LUBRICANT |
| STANDARD TOLERANCE DESIGNATION | ABEC NO. 7P |
| STYLE DESIGNATOR | NON-LOADING GROOVE, NON-SEPARABLE |
| SURFACE FINISH | GROUND |