| MATERIAL | STEEL CORROSION RESISTING OVERALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | AISI 440C ASSN STD SINGLE MATERIAL RESPONSE BALL |
| AISI 440C ASSN STD SINGLE MATERIAL RESPONSE INNER RING |
| AISI 440C ASSN STD SINGLE MATERIAL RESPONSE OUTER RING |
| AISI 400 ASSN STD SINGLE MATERIAL RESPONSE RETAINER |
| AISI 300 ASSN STD SINGLE MATERIAL RESPONSE SHIELD |
| AISI 300 ASSN STD SINGLE MATERIAL RESPONSE SNAP RING |
| STYLE DESIGNATOR | NON-LOADING GROOVE, NON-SEPARABLE, TANDEM MOUNTING |
| OVERALL WIDTH | 0.2350 INCHES MINIMUM AND |
| 0.2500 INCHES MAXIMUM |
| BORE DIAMETER | 0.2498 INCHES MINIMUM AND |
| 0.2500 INCHES MAXIMUM |
| OVERALL OUTSIDE DIAMETER | 0.3748 INCHES MINIMUM AND |
| 0.3750 INCHES MAXIMUM |
| LUBRICATION MATERIAL | LUBRICATING OIL |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-L-6085 FED SPEC SINGLE MATERIAL RESPONSE |
| STANDARD TOLERANCE DESIGNATION | ABEC NO. 5P |
| SURFACE FINISH | GROUND |
| SHIELD QUANTITY | 2 |
| LOAD DIRECTION | RADIAL |
| INTERNAL CLEARANCE | 0.0004 INCHES MINIMUM RADIAL AND |
| 0.0008 INCHES MAXIMUM RADIAL |
| BEARING PRELOAD DESIGNATION | MEDIUM |
| BEARING PRELOAD RATING | 1.0 POUNDS NOMINAL |
| SPECIAL FEATURES | ELECTRO ETCH MARKING ON BEARING OD FOR ASSEMBLY INSTRUCTIONS |
| SPECIFICATION/STANDARD DATA | 50294-SSRI-614ZZDB1HA5P48LO2U MANUFACTURERS SPECIFICATION |
| SUPPLEMENTARY FEATURES | BACK TO BACK CONFIGURATION;CAGE TYPE,CROWN,LAND PILOTED;DOUBLE METAL SHIELD,REMOVABLE;PACKAGING,UNIT,DUPLEX PAIRS |